« previous next »
Pages: [1]   Go Down

Author Topic: 8 rib belt  (Read 662 times)

0 Members and 1 Guest are viewing this topic.

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
8 rib belt
« on: September 12, 2009, 12:06:08 PM »
Anyone know if you can upgrade to an 8 rib belt? i already have the 8 rib pulley for the alternator, the idler(s) and the waterpump seem to be wide enough, what's left is the crank and the power steering - any pointers would be great if you guys can help me out, thank you.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Re: 8 rib belt
« Reply #1 on: September 12, 2009, 12:56:36 PM »
IIRC, you can run a 6-groove belt on a 8-groove pulley.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: 8 rib belt
« Reply #2 on: September 12, 2009, 01:37:43 PM »
Quote from: Jeffy on September 12, 2009, 12:56:36 PM
IIRC, you can run a 6-groove belt on a 8-groove pulley.
already having the alt 8 rib and it's fine with the 6 rib belt, just want an 8 rib belt since it turns out to be quite long with the york and supercharger added in.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end
Pages: [1]   Go Up
« previous next »