« previous next »
Pages: 1 [2]   Go Down

Author Topic: Decisions Decisions  (Read 2035 times)

0 Members and 6 Guests are viewing this topic.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Decisions Decisions
« Reply #15 on: December 14, 2009, 12:54:24 PM »
Quote from: TrailsLessTaken on December 14, 2009, 12:48:14 PM
Do you still run in to that problem when you do the AX-15 conversion in a jeep? or is that just using the ax-15 with the dakota 4cyl
No because the Jeep's AX-15 is upright.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Decisions Decisions
« Reply #16 on: December 14, 2009, 02:25:24 PM »
Quote from: TrailsLessTaken on December 14, 2009, 12:48:14 PM
Do you still run in to that problem when you do the AX-15 conversion in a jeep? or is that just using the ax-15 with the dakota 4cyl

if the flywheel has the same tooth pattern for the PCM then you could use the hole clutch assembly from the Dakota (the clutch is the only issue when going to the AX15 with the Dakota bellhousing for the 4 banger). don't know about the clocking issue though so you might have to get a clocking ring for the t-case.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

TrailsLessTaken

  • Guest
Re: Decisions Decisions
« Reply #17 on: December 15, 2009, 06:23:44 AM »
Its just a thought I had as I think about getting my motor rebuilt or buy a different used one to drop in this coming year.  I want to swap the tranny out and didnt know if for a few hundred more if it was worth it to get the enginge and just pull one drivetrain out and just drop the new one and hook everything back up
Logged
Pages: 1 [2]   Go Up
« previous next »