« previous next »
Pages: 1 [2]   Go Down

Author Topic: Opinion needed for a newbie  (Read 2690 times)

0 Members and 1 Guest are viewing this topic.

Offline VA_YJ

  • Member
  • Posts: 282
  • Now I need a CJ...
Re: Opinion needed for a newbie
« Reply #15 on: January 20, 2010, 02:24:41 PM »
Check this 8.8 tech posting.  There are some good links embedded.  You want a '95 or later solid rear axle (disk brakes and 31 spline axles).  Many have the traction lock limited slip (not as good as a locker).

http://4bangerjp.com/forums/index.php/topic,7797.0.html
Logged
95 YJ, 31 BFG ATs, 4.0 TB & spacer, Banks header, DynoMax CAT back, 19# inj, AEM CAI, 20 gal mod, Optima yellow
98 TJ, 35 BFG Krawlers, 4.0 liter, ax15, atlas 5:1, armor, Super 88 (under construction)
96 XJ Cheep Cherokee, 33s, 4.0 liter, AW4, future project
89 Waggy, 360 V8 727 dana 44s, it runs

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Opinion needed for a newbie
« Reply #16 on: January 20, 2010, 02:51:39 PM »
Quote from: 4-stankertj on January 20, 2010, 08:21:36 AM
Im trying to find a link for info on 8.8's. Looking for info for what to look for on the explorers to figure out what i need :stick:
http://www.therangerstation.com/tech_library/Axles.html
http://www.therangerstation.com/tech_library/Explorer8_8.html
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

OH-YJ

  • Guest
Re: Opinion needed for a newbie
« Reply #17 on: January 20, 2010, 03:19:16 PM »
If you look around, you could find some dana 44's out of a Rubicon, then you'd have the air lockers as well and that'd be one less thing to worry about. They're kinda $$$$$$ though.
Logged
Pages: 1 [2]   Go Up
« previous next »