« previous next »
Pages: [1]   Go Down

Author Topic: high idle speed  (Read 765 times)

0 Members and 1 Guest are viewing this topic.

sfcl

  • Guest
high idle speed
« on: June 12, 2010, 08:38:45 AM »
Hi all,
On my 1992 multipoint EFI, I have removed and cleaned the throttle body and the idle motor, replaced the TPS by a brand new one, replaced all the seals and gaskets. Since that the idle is very high (between 1500 and 1800 rpm). Otherwise the engine runs perfect. Any idea? Thanks!
Logged

sfcl

  • Guest
Re: high idle speed
« Reply #1 on: June 12, 2010, 08:48:36 AM »
Solved! I've just had to disconnect the battery terminals and put the 2 wires in contact to empty the processor memory. All is ok now. Sorry.
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: high idle speed
« Reply #2 on: June 12, 2010, 10:12:02 AM »
Quote from: sfcl on June 12, 2010, 08:48:36 AM
Solved! I've just had to disconnect the battery terminals and put the 2 wires in contact to empty the processor memory. All is ok now. Sorry.

hmm, weird, that shouldn't happen but might be b/c of the tps although should have recovered on it's own once you had the new one installed.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline bootguy

  • Member
  • Posts: 117
  • TANSTAAFL There Aint No Such Thing As A Free Lunch
Re: high idle speed
« Reply #3 on: June 18, 2010, 09:17:45 PM »
Have been having the same type of issues, but mine was 2500 RPM at idle.  After resetting the computer it is doing around 1500 RPM.  I have to replace my gasket in the intake/exhaust manifold because it leaks like a sieve, could this be the problem?

97 YJ 2.5 auto
Logged
1994 Jeep Wrangler, 2.5L, automatic, 2.5" lift, 4:88 gearing, 33" tires, 2.5" exhaust from manifold back, air restrictor removed.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: high idle speed
« Reply #4 on: June 18, 2010, 11:31:35 PM »
High idle is a good sign of an intake leak someplace.  TB and intake are you're suspects.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."
Pages: [1]   Go Up
« previous next »