« previous next »
Pages: 1 [2]   Go Down

Author Topic: These look impressive  (Read 3830 times)

0 Members and 6 Guests are viewing this topic.

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: These look impressive
« Reply #15 on: February 07, 2010, 10:54:22 AM »
Quote from: Jeffy on February 06, 2010, 11:06:32 PM
There is another issue.  YJ's use two holes for the hood latch.  TJ's have one and two alignment holes.  Personally, I'd rather have TJ style as they are easier to latch.

you could probably ask for a set w/o the holes for the latches, but you're right it is different - didn't think of that.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

OH-YJ

  • Guest
Re: These look impressive
« Reply #16 on: February 08, 2010, 12:39:10 PM »
I'd rather have steel fenders with 3" flares.
Logged

Offline neale_rs

  • Member
  • Posts: 3583
Re: These look impressive
« Reply #17 on: February 08, 2010, 12:52:24 PM »
Maybe a plastic hood with built in fenders.  http://www.pirate4x4.com/forum/showthread.php?t=693322
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: These look impressive
« Reply #18 on: February 08, 2010, 02:04:01 PM »
Quote from: neale_rs on February 08, 2010, 12:52:24 PM
Maybe a plastic hood with built in fenders.  http://www.pirate4x4.com/forum/showthread.php?t=693322

The problems with those is, all the stuff that is attached to the inner fender needs to be moved somewhere. Not impossible but a pain.
I do kinda like the look of those thou.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: These look impressive
« Reply #19 on: February 08, 2010, 02:12:11 PM »
Quote from: neale_rs on February 08, 2010, 12:52:24 PM
Maybe a plastic hood with built in fenders.  http://www.pirate4x4.com/forum/showthread.php?t=693322
I don't think those are injection molded plastic.  Without any fenders you'll need to run hood clips to keep the hood from lifting off.  They weren't designed to be used on the highways so it will probably shake.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Jesse-James

  • Guest
Re: These look impressive
« Reply #20 on: February 10, 2010, 10:20:42 PM »
Quote from: Jeffy on February 08, 2010, 02:12:11 PM
They weren't designed to be used on the highways so it will probably shake.

Where did you get that from? Not saying they won't but they say several times they made them for their street driven rigs.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: These look impressive
« Reply #21 on: February 11, 2010, 11:25:38 AM »
Quote from: Jesse-James on February 10, 2010, 10:20:42 PM
Where did you get that from? Not saying they won't but they say several times they made them for their street driven rigs.
Quote
http://www.pirate4x4.com/forum/showthread.php?t=693322

Seen them on a few rock buggies.  I guess they're OK for street but you'll still need to run hood clips.  I still remember seeing the clear polycarbonate hood as well.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Jesse-James

  • Guest
Re: These look impressive
« Reply #22 on: February 11, 2010, 09:46:12 PM »
Got another Email from them, the CJ version will be out in mid-late spring!  :weee:
Logged

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: These look impressive
« Reply #23 on: June 14, 2010, 12:20:44 PM »
Just got an email saying the YJ fenders will start shipping soon.

http://modernclassicenterprises.com/?page_id=14

No PICS yet.

I would be all over these but I am running steel tube fenders. The MCE ones are made for stock fenders  :'(
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

GBJeep

  • Guest
Re: These look impressive
« Reply #24 on: July 15, 2010, 03:05:14 PM »
So did anyone order a set and try them out yet?

My problem is that my suspension is stock and I have 31's and I dont know how it will look with flat fenders.  What do you guys think?  I can get the XRC (smittybuilt) tube fenders from summit racing for like $260 and these are only $100 less.  But first I would like to know what they would look like, so if you have any pics of a stock Jeep w/31's and tube fenders that would be awesome.
Logged

Offline aka-justin

  • Member
  • Posts: 883
Re: These look impressive
« Reply #25 on: July 17, 2010, 10:17:34 AM »
Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin
Pages: 1 [2]   Go Up
« previous next »