Author Topic: Super ultra magnum premium elite high performance module  (Read 1259 times)

0 Members and 1 Guest are viewing this topic.

Complete Loser

  • Guest

Offline jfrabat

  • Gargantuan Mango Tree MechanicŪ
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Super ultra magnum premium elite high performance module
« Reply #1 on: July 30, 2010, 04:06:58 PM »
Seems like snake oil to me...  Those chips typically just alter the MAP voltage.
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Super ultra magnum premium elite high performance module
« Reply #2 on: July 30, 2010, 07:48:04 PM »
Seems like snake oil to me...  Those chips typically just alter the MAP voltage.

negative, that would require power, ground and output (even input and rpm signal in some instances but that's a whole other animal) - this one only has 2 wires
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Super ultra magnum premium elite high performance module
« Reply #3 on: July 30, 2010, 08:03:23 PM »
Changes the resistance on the Temp sensor on the intake?
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Super ultra magnum premium elite high performance module
« Reply #4 on: July 30, 2010, 10:09:50 PM »
Changes the resistance on the Temp sensor on the intake?

yeah, AIT is usually where it goes
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Complete Loser

  • Guest
Re: Super ultra magnum premium elite high performance module
« Reply #5 on: July 31, 2010, 11:09:51 AM »
Does OBD1 even have an AIT?

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: Super ultra magnum premium elite high performance module
« Reply #6 on: July 31, 2010, 11:35:41 AM »
Yes....

My 94 has AIT... and its OBD1
Same sensor the OBDII units use visually....

Dave
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Super ultra magnum premium elite high performance module
« Reply #7 on: July 31, 2010, 12:09:12 PM »
Does OBD1 even have an AIT?

It's on the manifold towards the firewall side of the TB.  I took a picture of one a few years ago.

Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chardrc

  • Member
  • Posts: 3535
Re: Super ultra magnum premium elite high performance module
« Reply #8 on: August 01, 2010, 06:02:51 PM »
Does OBD1 even have an AIT?


even the pre-ODB1 tbi system has one
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr