« previous next »
Pages: [1]   Go Down

Author Topic: My windshield is stuck heh  (Read 1303 times)

0 Members and 1 Guest are viewing this topic.

95yjman

  • Guest
My windshield is stuck heh
« on: May 29, 2011, 11:55:00 PM »
Ok well, I was trying to lower my windshield the other day and its stuck.  I'm pretty sure this is the first time anybody has messed with it.  I removed the bolts from the two side roll bars, and then just removed the two brackets above the speakers.  Any tips on getting it to lower without to much force? its on a YJ by the way if that matters heh
Logged

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: My windshield is stuck heh
« Reply #1 on: May 30, 2011, 08:37:19 AM »
Maybe some PB Blaster on the hinges.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline neale_rs

  • Member
  • Posts: 3583
Re: My windshield is stuck heh
« Reply #2 on: May 30, 2011, 09:07:04 AM »
Does it move at all?  Maybe the cowl seal is glued on.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

95yjman

  • Guest
Re: My windshield is stuck heh
« Reply #3 on: May 30, 2011, 10:42:39 AM »
Quote from: neale_rs on May 30, 2011, 09:07:04 AM
Does it move at all?  Maybe the cowl seal is glued on.

Its just really stiff heh and I thought about using some PB blaster but will that mess with the paint at all?
Logged

Offline neale_rs

  • Member
  • Posts: 3583
Re: My windshield is stuck heh
« Reply #4 on: May 30, 2011, 10:59:39 AM »
It could.  Maybe just use WD40 or regular oil first to be safer.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline grumpygy

  • Member
  • Posts: 882
Re: My windshield is stuck heh
« Reply #5 on: May 30, 2011, 11:31:59 AM »
I use Kroil, penetrats great and have had no problem with paint.  I do not use wd40 because it will evaporate. Tthe Kroil sticks around.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: My windshield is stuck heh
« Reply #6 on: May 30, 2011, 11:47:00 AM »
PB Blaster, Liquid Wrench, CLP Break-free, etc...  Don't use WD40 unless you have to.  And if you do clean it up afterwards.  WD40 has lacquer in it which when dries towns into a glue.  3in1 oil would be better then WD40.  Try soaking it then rocking the windshield back and forth a little.  It should free up.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

dale j

  • Guest
Re: My windshield is stuck heh
« Reply #7 on: May 30, 2011, 01:33:18 PM »
did you remove the visors? they get hung up on the spreader bars. ask how i know hehe. time to upgrade bolts for visors now
Logged

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: My windshield is stuck heh
« Reply #8 on: May 30, 2011, 02:00:20 PM »
Quote from: dale j on May 30, 2011, 01:33:18 PM
did you remove the visors? they get hung up on the spreader bars. ask how i know hehe. time to upgrade bolts for visors now

good point  :thumbsup:

I would think he wants to drive it so should really remove the horizontal side bars going to the windshield on each side (that way the visors can stay on, the bolt holes might fail if you keep taking the bolts out, mine are rattling and i kept replacing the screws with bigger ones).
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

95yjman

  • Guest
Re: My windshield is stuck heh
« Reply #9 on: May 31, 2011, 10:00:35 PM »
rock on, I'll mess around with it once the hard top is off Thanks guys
Logged
Pages: [1]   Go Up
« previous next »