« previous next »
Pages: 1 [2]   Go Down

Author Topic: New Mods did not work out right  (Read 4110 times)

0 Members and 4 Guests are viewing this topic.

Offline grumpygy

  • Member
  • Posts: 882
Re: New Mods did not work out right
« Reply #15 on: May 28, 2011, 06:08:51 PM »
 Connectors were great.  But did notice that At Idle the fumes had my eyes watering.  So today was the 1st day I had enough time between rain showers to change the Injectors back to the stock ones.

  That did it she is running great now.  :clap:

  Still have things to do like the fan Conversion when parts get here and to finish cleaning the inside.  Hook the stereo back up.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline grumpygy

  • Member
  • Posts: 882
Re: New Mods did not work out right
« Reply #16 on: May 28, 2011, 06:31:34 PM »
Well I just compared my Injector with the FAQ's  on Injectors.  It looks just like the Ford #24 truck Injector.  It was supposed to be #19.  Are there any markings on them I should look for.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: New Mods did not work out right
« Reply #17 on: May 28, 2011, 07:15:34 PM »
Quote from: grumpygy on May 28, 2011, 06:31:34 PM
Well I just compared my Injector with the FAQ's  on Injectors.  It looks just like the Ford #24 truck Injector.  It was supposed to be #19.  Are there any markings on them I should look for.

the p/n you posted I found it listed as the "19#" which are 18.25lb/hr@43.5psi

you said they are new so unless the p/n is different not sure what to tell you. Are they yellow 4 nozzle bosch injectors?
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline grumpygy

  • Member
  • Posts: 882
Re: New Mods did not work out right
« Reply #18 on: May 28, 2011, 07:23:55 PM »
White 4 hole just like the 24 lb truck injectors.  Except the metal part is black not silver/chrome.
« Last Edit: May 28, 2011, 07:24:34 PM by grumpygy »
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: New Mods did not work out right
« Reply #19 on: May 28, 2011, 08:10:12 PM »
those are design II (4 hole disk design), not sure about the color - the white one in the FAQ is a pintle design (1 nozzle with needle) and that is different than what you are describing
you have the p/n stamped on the plastic portion of the injectors and is the one you posted?
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline grumpygy

  • Member
  • Posts: 882
Re: New Mods did not work out right
« Reply #20 on: May 28, 2011, 08:23:42 PM »
No Nothing on the plastic portion, and it for sure is 4 hole.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline grumpygy

  • Member
  • Posts: 882
Re: New Mods did not work out right
« Reply #21 on: May 29, 2011, 06:16:57 PM »
Think when I get the fuel down a little father I will just drain it.  She runs great for a while then all of a sudden starts to sputter and miss.  Then back to running great.  Also from time to time real hard to start other times starts just as it starts turning.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline grumpygy

  • Member
  • Posts: 882
Re: New Mods did not work out right
« Reply #22 on: August 28, 2011, 11:18:17 PM »
Just to add a note.  It was the new Coil I put on.  Changed that and misfire went away.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline jfrabat

  • Gargantuan Mango Tree MechanicŪ
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: New Mods did not work out right
« Reply #23 on: August 29, 2011, 04:26:06 PM »
Quote from: grumpygy on August 28, 2011, 11:18:17 PM
Just to add a note.  It was the new Coil I put on.  Changed that and misfire went away.

For some reason, I go through coils like a kid goes through candy...  I guess the position of the coil does not help, as I plunge it into mud and water all the time.  I am considering relocating it higher up on the firewall or something.  Also, for some reason, the high end coils (Accel, PD Screaming Demon) tend to last less than the cheapo ones.
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost
Pages: 1 [2]   Go Up
« previous next »