« previous next »
Pages: 1 [2]   Go Down

Author Topic: 95 YJ Alternator Upgrade  (Read 4435 times)

0 Members and 5 Guests are viewing this topic.

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: 95 YJ Alternator Upgrade
« Reply #15 on: November 10, 2011, 08:31:56 PM »
Quote from: dragon51 on November 10, 2011, 08:26:47 PM
So just run a extra pos wire what about on the neg side?  On that 160 amp. Did you have to make any mods to make it fit? 

Sorry for all the questions I always ask a lot on new things that I don't know about.


the ground is fine
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Re: 95 YJ Alternator Upgrade
« Reply #16 on: November 10, 2011, 08:32:01 PM »
Quote from: dragon51 on November 10, 2011, 08:26:47 PM
So just run a extra pos wire what about on the neg side?  On that 160 amp. Did you have to make any mods to make it fit?  

Sorry for all the questions I always ask a lot on new things that I don't know about.

Just like BH said and what's in the link I posted.  You might also need to move the spacer in or out as well.
« Last Edit: November 11, 2011, 12:37:37 PM by Jeffy »
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

reddogg

  • Guest
Re: 95 YJ Alternator Upgrade
« Reply #17 on: November 10, 2011, 10:02:21 PM »
I put the 160 on mine. Jeffy is right. All I had to do was adjust the spacer to make it fit. :thumb:
Logged

Offline jfrabat

  • Gargantuan Mango Tree MechanicŪ
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: 95 YJ Alternator Upgrade
« Reply #18 on: November 11, 2011, 11:32:46 AM »
Quote from: dragon51 on November 10, 2011, 08:26:47 PM
So just run a extra pos wire what about on the neg side?  On that 160 amp. Did you have to make any mods to make it fit? 

Sorry for all the questions I always ask a lot on new things that I don't know about.


Mine was a direct bolt on, and I bought the additional wire from them as well...
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost
Pages: 1 [2]   Go Up
« previous next »