« previous next »
Pages: [1]   Go Down

Author Topic: How do you take the shifter rod off?  (Read 653 times)

0 Members and 1 Guest are viewing this topic.

geocachenut

  • Guest
How do you take the shifter rod off?
« on: March 13, 2012, 07:05:45 PM »
Just removed the AX-5 trans from the 4 banger....lost 5th gear and the others thump a little.  I removed the shifter by taking the 4 bolts from the top of the tranny off.  I want to know, is there a way to remove just the shifter lever without removing the top cover to the tranny?  It is on a square stud.  Any ideas?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: How do you take the shifter rod off?
« Reply #1 on: March 13, 2012, 07:07:38 PM »
I believe it's push down and turn CCW.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Wheezer

  • Guest
Re: How do you take the shifter rod off?
« Reply #2 on: March 13, 2012, 10:33:44 PM »
Yup! You push down on the ring at the bottom of the shifter and turn it CCW. Mine was nice and slick with oil and other things so I used a machinists scribe to grip it enough to turn it.

Wheezer
Logged
Pages: [1]   Go Up
« previous next »