Author Topic: Winch on stock bumper  (Read 1103 times)

0 Members and 1 Guest are viewing this topic.

slazyks

  • Guest
Winch on stock bumper
« on: September 26, 2012, 06:50:22 PM »
I have a 2001 tj with stock bumper.  Can I mount a winch on it?  Do winches even mount to the bumper? 

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Winch on stock bumper
« Reply #1 on: September 26, 2012, 07:29:31 PM »
I have a 2001 tj with stock bumper.  Can I mount a winch on it?  Do winches even mount to the bumper? 
Yes, you can mount a winch and still have a stock bumper.  You'll need a winch plate to mount the winch to the Jeep though.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Winch on stock bumper
« Reply #2 on: September 26, 2012, 09:37:33 PM »
i think he's wondering if he can drill holes in the bumper and bolt the winch to it
what Jeffy said, you need a plate - even if there was enough room (which there isnt) it is not thick/strong enough
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

slazyks

  • Guest
Re: Winch on stock bumper
« Reply #3 on: September 27, 2012, 10:02:17 AM »
Thank you

Is it easy to wire? 

Offline neale_rs

  • Member
  • Posts: 3583
Re: Winch on stock bumper
« Reply #4 on: September 27, 2012, 10:59:31 AM »
Very easy, just two wires to connect to the battery.
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch