Author Topic: How do they mount?  (Read 1290 times)

0 Members and 1 Guest are viewing this topic.

95yjman

  • Guest
How do they mount?
« on: October 25, 2012, 09:50:35 PM »
How do the little flare extensions mount on a tj? Some of the holes to mount them are fully closed to where you run a bolt or anything.

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: How do they mount?
« Reply #1 on: October 25, 2012, 10:01:28 PM »
you mean the splash guards up front? bolts go thru them and into the tub, at least that's how those were on my YJ.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

95yjman

  • Guest
Re: How do they mount?
« Reply #2 on: October 25, 2012, 10:08:37 PM »
They mount different then the yj. The yj was that simple just a hole that you could get to on both sides. With the tj they have enclosed it so that if you take them off there isn't a bolt hole on the inside of the tub. I will have to take some pictures so you know what I mean.

95yjman

  • Guest
Re: How do they mount?
« Reply #3 on: October 25, 2012, 10:16:41 PM »
Ok here is the outside of the jeep with the mounting holes


and here is the inside


I'm guessing there was mounting hardware inside the holes that is long gone since the old ones where taken off.  How should I go about mounting my new ones?

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: How do they mount?
« Reply #4 on: October 25, 2012, 11:59:04 PM »
Nutserts, available at the dealership.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: How do they mount?
« Reply #5 on: October 25, 2012, 11:59:46 PM »
You don't need to get to the backside.  There should be two, although one looks to be missing, nutserts in those two small holes.




Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

95yjman

  • Guest
Re: How do they mount?
« Reply #6 on: October 26, 2012, 01:06:54 AM »
Ah I see, they are all mising but one...Thanks guys for the help!  ;)