« previous next »
Pages: [1]   Go Down

Author Topic: Ohm reading for YJ fuel level sender?  (Read 4198 times)

0 Members and 1 Guest are viewing this topic.

Islander

  • Guest
Ohm reading for YJ fuel level sender?
« on: April 05, 2006, 06:25:41 PM »
Anybody know which fuel gauge to get?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Ohm reading for YJ fuel level sender?
« Reply #1 on: April 05, 2006, 07:46:13 PM »
I believe they are 0 ohm empty/90 ohm full. At least the MPFI's are.  I'd imagine TBI is the same though.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Islander

  • Guest
Ohm reading for YJ fuel level sender?
« Reply #2 on: April 06, 2006, 06:28:47 AM »
Yeah, I can't imagine they'd go to the trouble of using a different sender - they kept most everthing else the same.

Thanks Jeff
Logged

Erik

  • Guest
Ohm reading for YJ fuel level sender?
« Reply #3 on: April 06, 2006, 01:38:36 PM »
pretty sure my tank reads 90 ohms when full
Logged

shotgun

  • Guest
Ohm reading for YJ fuel level sender?
« Reply #4 on: April 06, 2006, 02:27:47 PM »
Call me suspicous but I recall that there were two guages stateside.

Lets see what the trusty parts list comes up with. Jeep list three part #s  56001386 for 87-91, 83506590 for 92-93, and 56004879 for 94-96. These could all be cosmetic changes,

there is an article on 4x4wire (http://www.4x4wire.com/jeep/tech/interior/yjdash/) and he used a 90Ohm gauge on his 91 dash conversion. Not much info on the guage by part number, but is runs about $43.00.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Ohm reading for YJ fuel level sender?
« Reply #5 on: April 06, 2006, 04:05:55 PM »
We're talking senders not gauges.  Pre 91's have one set of gauges because they have a clock and lack the large 4WD light.  91-95 should be about the same.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

shotgun

  • Guest
Re: Ohm reading for YJ fuel level sender?
« Reply #6 on: April 07, 2006, 08:07:48 AM »
Quote from: "Islander"
Anybody know which fuel gauge to get?


But you can tackle this question from either of the wire.  I went for the guage side and you went for the sender side. Isn't this country great?
Logged

Islander

  • Guest
Re: Ohm reading for YJ fuel level sender?
« Reply #7 on: April 08, 2006, 02:01:05 PM »
Quote from: "shotgun"
Quote from: "Islander"
Anybody know which fuel gauge to get?


But you can tackle this question from either of the wire.  I went for the guage side and you went for the sender side. Isn't this country great?


Got it - it's actually 1 and 88, but the 0-90 gauge works just fine.  Thanks for everybodies help.
Logged
Pages: [1]   Go Up
« previous next »