« previous next »
Pages: [1]   Go Down

Author Topic: Starter bolts  (Read 1587 times)

0 Members and 2 Guests are viewing this topic.

Offline hiperon

  • Newbie
  • Posts: 4
Starter bolts
« on: November 05, 2018, 06:57:55 AM »
Guys, I need some help. My 4-banger never had the original starter. Previous owner installed starter from Lada. I bought original one from eBay, but the thing is — I don't have bolts for it. So if anyone knows which bolt I need or can measure them, I would be very happy.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Starter bolts
« Reply #1 on: November 05, 2018, 05:01:49 PM »
The factory are E12 external bit torx.  The size is 3/8-16 X 4", IIRC.  I'd get a standard hex head or capped allen head.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline hiperon

  • Newbie
  • Posts: 4
Re: Starter bolts
« Reply #2 on: November 05, 2018, 06:30:20 PM »
Quote from: Jeffy on November 05, 2018, 05:01:49 PM
The factory are E12 external bit torx.  The size is 3/8-16 X 4", IIRC.  I'd get a standard hex head or capped allen head.
Thanks!
Logged

Offline hiperon

  • Newbie
  • Posts: 4
Re: Starter bolts
« Reply #3 on: January 21, 2019, 04:49:49 AM »
Found correct bolts, and finally replaced last Russian part in my YJ. It was Niva’s starter. I bought original on eBay. Runs great.
Logged
Pages: [1]   Go Up
« previous next »