« previous next »
Pages: [1]   Go Down

Author Topic: New speedometer gear.... not reading speed  (Read 800 times)

0 Members and 1 Guest are viewing this topic.

bigbrad_4x4

  • Guest
New speedometer gear.... not reading speed
« on: April 24, 2006, 03:33:01 PM »
OK folks, I just bought a new speedometer gear for my Jeep, took off the old one, put on the new, plugged her back in, hooked up the sensor, went for a test drive, and apparently I was goin 0 mph when I was goin about 55.  Any ideas what might be the problem here?  I'd like some help ASAP so I can fix it before the time I WOULD LIKE to go to bed tonight.  Thanks.
Logged

SMC4WD

  • Guest
New speedometer gear.... not reading speed
« Reply #1 on: April 24, 2006, 03:38:31 PM »
Rotate the speedo gear...  It has three different notches...  Rotate it around so the mounting tabs match the speedo #.
Logged

bigbrad_4x4

  • Guest
New speedometer gear.... not reading speed
« Reply #2 on: April 24, 2006, 03:59:00 PM »
I forgot to meantion, my Jeep is a 2003 TJ SE.  I took it back out, and I don't see the 3 different notches.  It's an electronic speed sensor unit, I don't really see why it's not workin.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
New speedometer gear.... not reading speed
« Reply #3 on: April 24, 2006, 04:15:29 PM »
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

bigbrad_4x4

  • Guest
New speedometer gear.... not reading speed
« Reply #4 on: April 24, 2006, 04:33:35 PM »
Yes I have, I just looked at it again, and noticed somethin I overlooked before.  Thanks guys.
Logged
Pages: [1]   Go Up
« previous next »