Author Topic: Misfire on number four  (Read 1077 times)

0 Members and 1 Guest are viewing this topic.

GreenBayjeeper

  • Guest
Misfire on number four
« on: June 01, 2006, 08:03:13 PM »
I had Autozone read my check engine light (I couldn't get the key turn/odometer press method to work) and it came back with "misfire on number 4 cylnder".

I know I need to change out my plugs and wires.  What else should I do while I'm at it?  Rotor or cap or anything?

I haven't changed that stuff on anything this new.  I did the plugs and wires two years ago, but not the other goodies.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Misfire on number four
« Reply #1 on: June 01, 2006, 08:18:10 PM »
Might as well do the cap and rotor.  Maybe even do the coil while you're at it.

What year is the Jeep?
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

GreenBayjeeper

  • Guest
Misfire on number four
« Reply #2 on: June 02, 2006, 02:50:02 PM »
Oh yeah.  It's a 98.

GreenBayjeeper

  • Guest
Misfire on number four
« Reply #3 on: June 02, 2006, 08:11:03 PM »
I read the review for the rotor cap wire setup in the Nuts and Bolts.

Anyone have a price on one of those?

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Misfire on number four
« Reply #4 on: June 02, 2006, 08:20:20 PM »
I don't subscribe to any magazines anymore.  What setup are they talking about?
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

GreenBayjeeper

  • Guest

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Misfire on number four
« Reply #6 on: June 02, 2006, 08:36:15 PM »
Oh, the PD FireWire set that I helped on.  I really like it.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

GreenBayjeeper

  • Guest
Misfire on number four
« Reply #7 on: June 02, 2006, 08:54:16 PM »
I thought you might. ;)

I googled PD FireWire, but got bupkis.

Where might I find more about this finely developed bit of engineering?

A price range, or where to get one would be great.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Misfire on number four
« Reply #8 on: June 02, 2006, 09:47:04 PM »
You can either order from the PD directly or get them from Qtech.

I believe they're under $200 for everything.

Like I've mentioned before I'm running AUtoLite's which PD sent me and they've been gapped to .065" and no problems.  I could probably go up to .070" and still not have problems.   I do run my engine up to redline and it doesn't misfire.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."