Author Topic: will it fit  (Read 1193 times)

0 Members and 3 Guests are viewing this topic.

mexi0501

  • Guest
will it fit
« on: April 11, 2007, 09:14:31 PM »
jeep currently has 3 inch body lift and 4 in suspension lift. 35in boggers fit well but i want to take nerf bars off and want to fit 38's. does anyone have this setup and have pics to show it or know anyone who does. will it even fit without rub.

Offline jagular7

  • Member
  • Posts: 987
Re: will it fit
« Reply #1 on: April 12, 2007, 07:33:28 AM »
jeep currently has 3 inch body lift and 4 in suspension lift. 35in boggers fit well but i want to take nerf bars off and want to fit 38's. does anyone have this setup and have pics to show it or know anyone who does. will it even fit without rub.

No, you are out of luck.

Yes, since the 38" is only 1.5" taller in comparison to a 35" tire on paper. If you can fit a 35" and have 1.5" of more room, then it'll work.

 :dance:

 :ass:
Jagular7
97 SE - Rubbered and locked for fun
94 SE - stock, collecting parts for 37s

Offline jagular7

  • Member
  • Posts: 987
Re: will it fit
« Reply #2 on: April 12, 2007, 07:40:11 AM »
If this is the Jeep you are referring, JEEP, then yes. But I'd be more worried about the turning radius and the axles accepting that tall and weight of a tire. You are pushing the axles now with the 35" Boggers. You'll need more than gear ratio to make up for the tire's weight. Brakes will also need to be addressed.

Why would you need to remove the nerf bars? If you don't want them, remove them.

Save your money.  :brick:
Jagular7
97 SE - Rubbered and locked for fun
94 SE - stock, collecting parts for 37s

Offline Mozman68

  • Poseur ExtraordinaireŽ
  • Member
  • *
  • Posts: 2660
Re: will it fit
« Reply #3 on: April 12, 2007, 08:21:56 AM »
That's what she said...... :roflol:
2009 Audi S5....what....its 4wd...sort of....

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: will it fit
« Reply #4 on: April 12, 2007, 01:08:06 PM »
35's will fit BUT I wouldn't run them with stock axles.  Especially with boggers.  Those are HEAVY tires.  I'm sure 35's will rub when at a full turn so you'll need to turn out the steering stops a bit, too.  I wouldn't even think of 38's on the axles.

I think the reasoning for removing the nerfs is that when going with a larger tire the clearance between the nerf and the rear tire gets pretty small.  Although under compression the tire will swing rearward.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

jcsanders79

  • Guest
Re: will it fit
« Reply #5 on: April 12, 2007, 02:11:14 PM »
Rubbing?  I'd be worried about snapping!  What Kind of axles do you have?  What type of wheeling do you need 38's for

lutzke21

  • Guest
Re: will it fit
« Reply #6 on: April 19, 2007, 06:49:08 PM »
And this Jeep has a 3 inch body lift?