Author Topic: Hood vent options  (Read 2432 times)

0 Members and 1 Guest are viewing this topic.

chrisfranklin

  • Guest
Hood vent options
« on: March 16, 2007, 02:05:28 AM »
Hood vents for Jeep to cool things down at low speed?

Have your $750 AEV hood: https://secure.aev-conversions.com/store/merchant.mvc?Screen=PROD&Product_Code=41003001AA

Then I just saw these "raceace" vents for $180 or so:  www.raceace.com

Cheaper add-on metal vents probably exist somewhere or you can go supercheap and just saw some holes in the hood

Offline chardrc

  • Member
  • Posts: 3535
Re: Hood vent options
« Reply #1 on: March 16, 2007, 06:04:57 AM »
would be kinda cool... reminds me when my family was in our cj3a going up.. i think it was engineers pass in Colorado as you come out of teleride and the end of the trail goes to ouray.. and it was overheating so we were going up this incredibly narrow trail with the hood up to release heat so we had to stick our heads out to see were we were going :eek:.
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Jesse-James

  • Guest
Re: Hood vent options
« Reply #2 on: March 16, 2007, 06:09:53 AM »
If you're considering doing this read this article, pretty good write up and testing of it's effectiveness.

http://www.oman4x4.com/hoodvents.htm

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Hood vent options
« Reply #3 on: March 16, 2007, 06:11:45 AM »
Couple guys in my club have used late 90's Grand Prix GTP hood vents.  They look pretty decent and can be painted to match the hood.
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline chardrc

  • Member
  • Posts: 3535
Re: Hood vent options
« Reply #4 on: March 16, 2007, 06:14:13 AM »
nice right up at that link.
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

chrisfranklin

  • Guest
Re: Hood vent options
« Reply #5 on: March 16, 2007, 06:58:43 AM »
Great if you could have that kind of detail and evidence supporting all the mods that you do.  probably most of the Jeep performance mod manufacturers don't even go to that kind of trouble.  Awesome :lol:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Hood vent options
« Reply #6 on: March 16, 2007, 12:15:49 PM »
Gees that first link with them are $$$$.  I'd just recover a set off a salvage for a few bucks.

Nice install, I think I remember seeing that on Jeepsunlimited a while back.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

YJmechanic

  • Guest
Re: Hood vent options
« Reply #7 on: March 16, 2007, 01:22:42 PM »
it was a good writeup and i'm sure they would help but i have to think that if the ones mentioned above we designed and tested on an xj that they would help considerably less on a yj or tj just because there is no room or clearance in any derection on an xj while ours have a lot of room for the air to move.  i would just take out the inner fenderwells,  that should help even more than some vents.

Jesse-James

  • Guest
Re: Hood vent options
« Reply #8 on: March 16, 2007, 06:19:10 PM »
i have to think that if the ones mentioned above we designed and tested on an xj that they would help considerably less on a yj or tj

What was designed and tested around an XJ?
« Last Edit: March 16, 2007, 07:14:22 PM by Jesse-James »

StvDiego

  • Guest
Re: Hood vent options
« Reply #9 on: March 16, 2007, 07:30:09 PM »
When I had my XJ I installed a cowl induction hood scoop, did wonders, and looked cool. Found a lot of info relating to cooling a 4.0, particulary in an XJ, at this site:

http://www.go.jeep-xj.info/index.htm

Look down the index for Body Modifications, Bonnet/Hood/Vent links.


YJmechanic

  • Guest
Re: Hood vent options
« Reply #10 on: March 17, 2007, 08:58:11 AM »
they were originally brought out for the xj  all the pictures and magazines had them first for the xj

Jesse-James

  • Guest
Re: Hood vent options
« Reply #11 on: March 17, 2007, 09:50:28 AM »
That doesn't answer my question on you're original post. You said
the ones mentioned above we designed and tested on an xj that they would help considerably less on a yj or tj
yet the ones in that link were tested on a TJ and don't mention an XJ anywhere.