« previous next »
Pages: [1]   Go Down

Author Topic: crown automotive.  (Read 811 times)

0 Members and 1 Guest are viewing this topic.

cmc1

  • Guest
crown automotive.
« on: October 26, 2007, 05:10:27 PM »
does anyone have any expieriance with crown products?Im getting ready to regear my dana35 and change my spider gears.I have allready bought the crown spider gears but am now questioning the quality of the parts.I will be changing gears and axles and dont want to put crappy spider gears in to ruin everything.Just wwondered if anyone had any expierance good or bad.thanks chris
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: crown automotive.
« Reply #1 on: October 26, 2007, 05:22:15 PM »
Crown bought all the mfg. rights and tools from Jeep when they stopped making the XJ, YJ, etc...  I have Crown engine mounts in my Jeep now.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

cmc1

  • Guest
Re: crown automotive.
« Reply #2 on: October 26, 2007, 05:24:27 PM »
        so jeffy you think the quality of the spider gears should be ok.thanks in advance
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: crown automotive.
« Reply #3 on: October 26, 2007, 05:39:45 PM »
They're probably getting them from Spicer anyway.  There isn't really much to side and spider gears.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

cmc1

  • Guest
Re: crown automotive.
« Reply #4 on: October 26, 2007, 06:20:25 PM »
  Thanks jeffy.Ill post an intro and try to post a pic of my jeep tommoro.
Logged

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: crown automotive.
« Reply #5 on: October 28, 2007, 05:58:05 PM »
Quote from: cmc1 on October 26, 2007, 05:10:27 PM
does anyone have any expieriance with crown products? ... Just wwondered if anyone had any expierance good or bad.

Chris,

Although it has nothing to do with gears, I am currently running a Crown fuel pump (about a year now) and have had no problems at all...  Hope this helps!

Felipe
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

might4banger

  • Guest
Re: crown automotive.
« Reply #6 on: October 30, 2007, 07:12:38 PM »
I am running a Crown vacuum shift motor for my front axle... good stuff and reasonably priced.
Logged
Pages: [1]   Go Up
« previous next »