« previous next »
Pages: 1 [2]   Go Down

Author Topic: bent leaf spring  (Read 1615 times)

0 Members and 2 Guests are viewing this topic.

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: bent leaf spring
« Reply #15 on: January 04, 2008, 11:51:02 AM »
If you can afford it, I would get the SYE kit and a CV shaft as well while you are at it...  If not, you can always use the TC lowering kit included in the lift kit, but you will loose some ground clearance as a result.
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: bent leaf spring
« Reply #16 on: January 04, 2008, 12:46:31 PM »
Quote from: neale_rs on January 04, 2008, 10:53:03 AM
Thanks to all for the advice.  I've decided to stop using the jeep for now and am ordering an RE 4.5 XD lift kit to replace the springs!

Good choice, the XD's are supposed to be the best traditional lift kit.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: bent leaf spring
« Reply #17 on: January 04, 2008, 01:10:49 PM »
It pays to read comments here on 4bangerjp!
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline aw12345

  • Member
  • Posts: 3065
    • my jeep picture page
Re: bent leaf spring
« Reply #18 on: January 05, 2008, 05:27:49 AM »
Good idea its the leading side of the spring if it breaks the axle will walk back the driveshaft will come out and other not at all things will happen
Logged
2006 Jeep Wrangler TJ SE
2004 Jeep Wrangler TJ SE
Pages: 1 [2]   Go Up
« previous next »