« previous next »
Pages: [1]   Go Down

Author Topic: Changing the Serpentine Belt on an 01 TJ  (Read 840 times)

0 Members and 1 Guest are viewing this topic.

01amberfirewv

  • Guest
Changing the Serpentine Belt on an 01 TJ
« on: June 26, 2008, 07:33:05 AM »
I need to change the Serpentine Belt on my TJ (at least 60,000 on the current one) and the idler pully doesnt seem to move.  Is it spring loaded or do I just losen the bolt and move the pulley?
Logged

Offline Mozman68

  • Poseur ExtraordinaireŽ
  • Member
  • *
  • Posts: 2660
Re: Changing the Serpentine Belt on an 01 TJ
« Reply #1 on: June 26, 2008, 09:39:21 PM »
You should be able to just loosen the bolt enough to pull the belt off..... :thumb:
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline jagular7

  • Member
  • Posts: 987
Re: Changing the Serpentine Belt on an 01 TJ
« Reply #2 on: July 02, 2008, 07:12:53 AM »
Not sure when Jeep changed, (thinking 04 or so), but check behind and underneath the ps pump. The bracket holding the pump will have a bolt underneath it that is in a channel and a long adjustable bolt on the back. You loosen both and work the adjustable to pull/draw the pump to tighten/loosen the belt.
Logged
Jagular7
97 SE - Rubbered and locked for fun
94 SE - stock, collecting parts for 37s
Pages: [1]   Go Up
« previous next »