« previous next »
Pages: [1]   Go Down

Author Topic: homemade air intake  (Read 1150 times)

0 Members and 1 Guest are viewing this topic.

andrew383

  • Guest
homemade air intake
« on: December 06, 2008, 09:52:23 PM »
whats up guys.. im gonna fab up my own air intake using the factory box.i need some advice first tho.im gonna get the 62mm tb as well so i was thinkin about going with 2.5" or 3" piping.62mm is just under 2.5" so i dont wanna go to big.
so how big should i go to keep from losing power?
Logged

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: homemade air intake
« Reply #1 on: December 07, 2008, 09:22:03 AM »
Measure where the tube goes into the TB. Whatever that measurement is that's what I would go with.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: homemade air intake
« Reply #2 on: December 07, 2008, 01:04:49 PM »
I've found it easiest to use a 4.0L intake tube, takes out all the hassle.  Nice smooth tube and doesn't have the chambers the 2.5L does.
Logged

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: homemade air intake
« Reply #3 on: December 07, 2008, 06:54:59 PM »
Quote from: Bounty Hunter on December 07, 2008, 01:04:49 PM
I've found it easiest to use a 4.0L intake tube, takes out all the hassle.  Nice smooth tube and doesn't have the chambers the 2.5L does.

I thought the 2.5 and 4.0 TB had the same size intake hole (where the air intake is). When I went from the 2.5L TB to the 4.0 my rockit city air tube fit both with no problems.

Are they the same size?
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: homemade air intake
« Reply #4 on: December 07, 2008, 07:21:32 PM »
Quote from: FourbangerYJ on December 07, 2008, 06:54:59 PM
I thought the 2.5 and 4.0 TB had the same size intake hole (where the air intake is). When I went from the 2.5L TB to the 4.0 my rockit city air tube fit both with no problems.

Are they the same size?

OD vs. ID  OD is the same.  That's what the intake relies on.
« Last Edit: December 07, 2008, 07:22:21 PM by Jeffy »
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

andrew383

  • Guest
Re: homemade air intake
« Reply #5 on: December 07, 2008, 07:34:59 PM »
well 62mm is roughly 2.47 inches so i was thinkin 2.75" tubing.looking at all the parts ill need i think i can built it for about $100.  :nod:
Logged

andrew383

  • Guest
Re: homemade air intake
« Reply #6 on: December 16, 2008, 06:19:12 PM »
hey guys can someone measure the outlet at the air box? it looks like 3in but i wanna be sure.im gonna order the stuff this week so its waiting for me at home  :weee:
Logged
Pages: [1]   Go Up
« previous next »