« previous next »
Pages: 1 [2]   Go Down

Author Topic: Best way to find tdc  (Read 3866 times)

0 Members and 1 Guest are viewing this topic.

jcsanders79

  • Guest
Re: Best way to find tdc
« Reply #15 on: March 06, 2009, 10:25:14 PM »
Quote from: aw12345 on March 06, 2009, 09:53:56 PM
The timing being of will not make it stall a bad cranck sensor could
Do you have enough certificates to post this? :pot:
Logged

Offline aw12345

  • Member
  • Posts: 3065
    • my jeep picture page
Re: Best way to find tdc
« Reply #16 on: March 06, 2009, 10:49:59 PM »
maybe haha I got a ton of them oieces of paper somewhere in a drawer.
Logged
2006 Jeep Wrangler TJ SE
2004 Jeep Wrangler TJ SE

2.5Blues

  • Guest
Re: Best way to find tdc
« Reply #17 on: March 06, 2009, 11:42:14 PM »
Guess I'll throw another $30 part at it tomarrow. As far as the swap or just having the different motor or block and trans in there will that matter at all? I read something about the fly wheel being  different in the renix setup. Anyone know anything about that?
Logged

Offline aw12345

  • Member
  • Posts: 3065
    • my jeep picture page
Re: Best way to find tdc
« Reply #18 on: March 06, 2009, 11:49:25 PM »
Well that could be what throws the timing of since it picks up the timing signal of the flywheel. You would really want to see that the flywheels are the same as far as where it picks up the timing signal
Logged
2006 Jeep Wrangler TJ SE
2004 Jeep Wrangler TJ SE

2.5Blues

  • Guest
Re: Best way to find tdc
« Reply #19 on: March 07, 2009, 01:38:10 PM »
I replaced the crank sensor today. It still goes outta timing when i have the light hooked up and i give it throttle. Not really sure what else to do. Thinking about setting it
on fire lol!
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Best way to find tdc
« Reply #20 on: March 07, 2009, 01:58:19 PM »
I'd check and see if that flywheel is compatible.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

2.5Blues

  • Guest
Re: Best way to find tdc
« Reply #21 on: March 08, 2009, 07:18:16 PM »
I dont think it is. I got a 95 motor and trans in a 89. I talked with the guy I got it from he confirmed it. It seems that maybe my problem. Now I gotta look into getting the right flywheel. I might as well do a clutch and bearing and anyother gaskets that are exposed with pulling the trans and transfer case. Guess its gonna be down longer than i expected....  :mad:
Logged
Pages: 1 [2]   Go Up
« previous next »