« previous next »
Pages: [1]   Go Down

Author Topic: Mate an NSG-370 (6-spd) to 2.5L?  (Read 768 times)

0 Members and 1 Guest are viewing this topic.

TN00TJ

  • Guest
Mate an NSG-370 (6-spd) to 2.5L?
« on: May 09, 2009, 11:44:45 PM »
Has anyone done, or even considered, mating an '05 or '06 6-spd (NSG-370) to the 2.5L? (Y2K)

It's a sweet little transmission and since I'm in the process of TB/cam/Banks/Flowmaster upgrade this is the perfect time to do it?

Thoughts?

(Jeffy, I'm not sure if this should have been posted in the Mess Hall rather than here.)
« Last Edit: May 10, 2009, 12:10:51 AM by TN00TJ »
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Mate an NSG-370 (6-spd) to 2.5L?
« Reply #1 on: May 10, 2009, 11:07:07 AM »
The problem I see is the 2.4L as well as the 4.0L use a different bellhousing bolt pattern then the 2.5L.  I doubt anyone makes an adapter so it would be a custom job.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

TN00TJ

  • Guest
Re: Mate an NSG-370 (6-spd) to 2.5L?
« Reply #2 on: May 10, 2009, 11:56:48 AM »
I assumed there would be a need for an adapter.

I'm going to call Advance in the morning but in the meantime, I thought I'd check with the Forum members.
Logged

DodgeMudder

  • Guest
Re: Mate an NSG-370 (6-spd) to 2.5L?
« Reply #3 on: May 11, 2009, 04:24:26 PM »
I checked into this before I swapped the nv3550 into my YJ, everything I came up w/ is w/o doing allot of custom work it just isn't going to happen.
Logged
Pages: [1]   Go Up
« previous next »