« previous next »
Pages: 1 [2]   Go Down

Author Topic: outer axle seal -- d60  (Read 2719 times)

0 Members and 4 Guests are viewing this topic.

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: outer axle seal -- d60
« Reply #15 on: September 05, 2010, 07:06:47 PM »
Hah...I did....1/2 full.

Got my buddy to come with me.  We hooked it up to the Jeep and towed it home.

Tried to push it so it would get up the slight incline o my driveway and into the garage, but it didn't make it.

Decided to try it again and I heard the starter...tried it one more time and it started up...drove it into the garage.

Going to tear into it tomorrow to make sure it isn't something as simple as the power to the starter.  If all of that checks out, I may be replacing the starter on Tuesday if I can get the part.  Good thing we live right next to the school where my wife works.  :thumbsup:
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline aw12345

  • Member
  • Posts: 3065
    • my jeep picture page
Re: outer axle seal -- d60
« Reply #16 on: September 05, 2010, 08:03:09 PM »
A jeep towing a Honda, now there is a nice picture for vehicle reliability lol.
Could very well be the starter or a loose or corroded cable at the starter
Logged
2006 Jeep Wrangler TJ SE
2004 Jeep Wrangler TJ SE

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: outer axle seal -- d60
« Reply #17 on: September 05, 2010, 08:15:03 PM »
could also be the solenoid which would be le$$ damage than the whole starter
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: outer axle seal -- d60
« Reply #18 on: September 05, 2010, 08:26:59 PM »
Sounds like the way most of my projects go. Glad you got the leak fixed.

Make sure you take the plastic cap off the new battery posts. It won't do anything if one is one...or so I have been told  :whistle:
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline neale_rs

  • Member
  • Posts: 3583
Re: outer axle seal -- d60
« Reply #19 on: September 06, 2010, 07:46:57 AM »
Glad you got it fixed.  Thanks for posting the pictures.  I never imagined the seal would be so exposed like that.  Maybe some silicone around the edge would help it last longer.  It seems it would be more reliable to have seals by the diff and have bearings lubed with grease like in front axles.

Can the spindle be replaced on D60s?
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: outer axle seal -- d60
« Reply #20 on: September 06, 2010, 11:44:02 AM »
Quote from: neale_rs on September 06, 2010, 07:46:57 AM
Glad you got it fixed.  Thanks for posting the pictures.  I never imagined the seal would be so exposed like that.  Maybe some silicone around the edge would help it last longer.  It seems it would be more reliable to have seals by the diff and have bearings lubed with grease like in front axles.

Can the spindle be replaced on D60s?

The seal isn't normally exposed like that - normally there is a backing plate and a drum around it.
Logged
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: outer axle seal -- d60
« Reply #21 on: September 06, 2010, 12:37:09 PM »
Yep....can't seem to find those though. As soon as I do I'll change them out.
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: outer axle seal -- d60
« Reply #22 on: September 09, 2010, 07:59:36 AM »
Quote from: oldjeep on September 06, 2010, 11:44:02 AM
The seal isn't normally exposed like that - normally there is a backing plate and a drum around it.

re-reading this and yes...now I know what you are referencing...hah...

Disc brakes welded on the tube prevent me from using the plate....I rubbed some grease in the gap to at least try and prevent crap from getting in there.

The first seals lasted 2.5 years of daily use and trail riding....at $6 a pop, not too worried about it.  Just something else to look out for.
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: outer axle seal -- d60
« Reply #23 on: September 09, 2010, 02:23:27 PM »
You could probably fit a backing plate on there and just cut it out for the caliper.  That's how the OEM ones are done.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

dustjunkie

  • Guest
Re: outer axle seal -- d60
« Reply #24 on: September 10, 2010, 10:27:34 AM »
Quote from: Mozman68 on September 09, 2010, 07:59:36 AM
re-reading this and yes...now I know what you are referencing...hah...

Disc brakes welded on the tube prevent me from using the plate....I rubbed some grease in the gap to at least try and prevent crap from getting in there.

The first seals lasted 2.5 years of daily use and trail riding....at $6 a pop, not too worried about it.  Just something else to look out for.

I have run rear seals like that for a lot of years without an issue.  My bet is the seal got cut in the install.
Logged

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: outer axle seal -- d60
« Reply #25 on: September 10, 2010, 06:11:24 PM »
Quote from: dustjunkie on September 10, 2010, 10:27:34 AM
I have run rear seals like that for a lot of years without an issue.  My bet is the seal got cut in the install.

Only takes one axle deep dip in sandy mud to eat them up.
Logged
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: outer axle seal -- d60
« Reply #26 on: September 10, 2010, 07:27:49 PM »
Quote from: oldjeep on September 10, 2010, 06:11:24 PM
Only takes one axle deep dip in sandy mud to eat them up.

...and that's what it was this time.  The Badlands will do that to you.... :'(
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: outer axle seal -- d60
« Reply #27 on: September 11, 2010, 05:46:04 AM »
On my D60 I ran Modified Chev Front D44 backing plates and calipers, which keep the crap out of the seals.  Mine was a semi float D60, but should work on an FF as well.
Logged
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

dustjunkie

  • Guest
Re: outer axle seal -- d60
« Reply #28 on: September 13, 2010, 01:50:09 PM »
Quote from: oldjeep on September 10, 2010, 06:11:24 PM
Only takes one axle deep dip in sandy mud to eat them up.


What is this 'mud' you refer too? 
Logged
Pages: 1 [2]   Go Up
« previous next »