Author Topic: 94 Wangler gear ratio  (Read 923 times)

0 Members and 1 Guest are viewing this topic.

haulincats

  • Guest
94 Wangler gear ratio
« on: December 11, 2010, 08:39:52 PM »
I'm trying to find out the gear ratio of a front end from a
1994 Jeep Wrangler. It had a 4 cylinder with a 5 speed.
Can't find any numbers on it.
Was there a common one?
Thanks,
Vance

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Re: 94 Wangler gear ratio
« Reply #1 on: December 11, 2010, 08:49:38 PM »
I'm trying to find out the gear ratio of a front end from a
1994 Jeep Wrangler. It had a 4 cylinder with a 5 speed.
Can't find any numbers on it.
Was there a common one?
Thanks,
Vance
There should be a tag on the diff cover, unless someone removed the diff cover and list the tag.  More then likely your gear ratio for the front is 4.10:1.  The rear will be 4.11:1.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Torch_Ind

  • Guest
Re: 94 Wangler gear ratio
« Reply #2 on: December 12, 2010, 01:55:09 PM »
There should be a tag on the diff cover, unless someone removed the diff cover and list the tag.  More then likely your gear ratio for the front is 4.10:1.  The rear will be 4.11:1.

+1 unless someone swapped the gears or axles.  easy way to be 100% is do a diff service pull the cover dump fluids and count the teeth and do the math really easy to do!!

Bikerjr1

  • Guest
Re: 94 Wangler gear ratio
« Reply #3 on: December 16, 2010, 07:51:32 PM »
Put the rear up on jack stands mark the rear tire and mark the drive shaft. turn the wheel and count the number of turns the drive shaft make.  If it makes 4 turns it's 4.11 if it comes up short it is a 3. something.
JR