Author Topic: running problem  (Read 518 times)

0 Members and 1 Guest are viewing this topic.

jinxjay

  • Guest
running problem
« on: May 26, 2011, 04:04:47 PM »
hi folks, I was wondering if anyone had any ideas on a problem of mine,

i've looked through the boards but cant find anyone with the same problem as me.

I have a 1989 wrangler with 2.5 tbi,

it starts fine cold, idles ok and drives for about 5 minutes, till the temp gets about !/4 of the way up,

then it starts cutting out, dropping rpm's then stalling and a flat spot a mile wide.

if you can nurse it through this for 3 to for minutes it just clears, and when up to temp runs perfect no stalling or any other issues,

has anybody got any ideas???

thanks in advance Jason.


Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: running problem
« Reply #1 on: May 26, 2011, 08:31:00 PM »
ECM temp sensor maybe? unless it's some fuel delivery issue. This is in case your problems are not just at idle but loss of power when driving as well.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end