Author Topic: CJ GM 151 question  (Read 822 times)

0 Members and 3 Guests are viewing this topic.

cjfarmer

  • Guest
CJ GM 151 question
« on: July 10, 2011, 05:27:29 PM »
Okay so i was doing some research and i believe that the 4 cylinders in fiero's are the same engine but with TBI? I think the same with 80's s-10's.
 Could i use the TBI off of one of them and put in mine?

Torch_Ind

  • Guest
Re: CJ GM 151 question
« Reply #1 on: July 10, 2011, 07:42:50 PM »
Okay so i was doing some research and i believe that the 4 cylinders in fiero's are the same engine but with TBI? I think the same with 80's s-10's.
 Could i use the TBI off of one of them and put in mine?

I though fiero's were quad 4 engine

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: CJ GM 151 question
« Reply #2 on: July 10, 2011, 09:43:19 PM »
I though fiero's were quad 4 engine
The Fiero used the Tech4/Pontiac Iron Duke I4 and the 2.8L V6.

I believe you can convert over to a TBI from a later model without too many problems.  Just need to swap everything over from a donor.
« Last Edit: July 10, 2011, 09:43:29 PM by Jeffy »
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

cjfarmer

  • Guest
Re: CJ GM 151 question
« Reply #3 on: July 11, 2011, 02:10:50 PM »
Thanks guys. I could have misread something.
One more quick question, I'm needing a radiator. Is there any other car i could pull a radiator from that would fit?