« previous next »
Pages: [1]   Go Down

Author Topic: When did Dana start direct sales?  (Read 2203 times)

0 Members and 2 Guests are viewing this topic.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
When did Dana start direct sales?
« on: November 04, 2014, 11:24:55 PM »
I didn't know they started direct sales.  They have some blank housings with shafts and gears as well as some complete bolt-on axles for the JK.  Looks like the axles are mainly for the Jeeps.  The D44 is 58.4" and the D60 is 61.7".  The Ultimate 60 sounds pretty good though there is no price.

http://www.crateaxle.com/products







http://www.crateaxle.com/products/dana-ultimate-60

Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Mozman68

  • Poseur ExtraordinaireŽ
  • Member
  • *
  • Posts: 2660
Re: When did Dana start direct sales?
« Reply #1 on: November 05, 2014, 05:03:06 AM »
Makes you wonder if the rumors about Jeep moving away from solid axles for the Wrangler are true and that Dana is entering the retail market to compensate?
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: When did Dana start direct sales?
« Reply #2 on: November 05, 2014, 01:29:49 PM »
Quote from: Mozman68 on November 05, 2014, 05:03:06 AM
Makes you wonder if the rumors about Jeep moving away from solid axles for the Wrangler are true and that Dana is entering the retail market to compensate?
I think it's more like Dana saw how much money they are missing out on by not selling directly.  I wouldn't mind those 1T JK axles.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Mozman68

  • Poseur ExtraordinaireŽ
  • Member
  • *
  • Posts: 2660
Re: When did Dana start direct sales?
« Reply #3 on: November 05, 2014, 03:17:07 PM »
Quote from: Jeffy on November 05, 2014, 01:29:49 PM
I think it's more like Dana saw how much money they are missing out on by not selling directly.  I wouldn't mind those 1T JK axles.

If it took them this long to figure that out, I don't hold out much hope for them being successful.
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: When did Dana start direct sales?
« Reply #4 on: November 05, 2014, 03:36:39 PM »
Seems like I stumbled over it before it was officially launched at SEMA.

http://www.fourwheeler.com/news/the-ultimate-dana-60-axle-assembly-for-the-jeep-jk-wrangler/

Quote from: Mozman68 on November 05, 2014, 03:17:07 PM
If it took them this long to figure that out, I don't hold out much hope for them being successful.
They are one of the biggest axle makers, they are slow to change/adapt.  A lot of the smaller aftermarket builders aren't around anymore.  I'm sure they noticed how people were buying up the Mopar axles after the fact.  JK Rubicon axles are popular even with the YJ and TJ crowd as well as the JK'ers.  The D44 and the D60's seem to be sized for Jeeps.  The others don't have specs yet but I'd assume that they would be spec'ed for something else.
« Last Edit: November 05, 2014, 03:36:58 PM by Jeffy »
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chardrc

  • Member
  • Posts: 3535
Re: When did Dana start direct sales?
« Reply #5 on: November 05, 2014, 09:03:22 PM »
Must be a new direction after the bancrupcy and sale of some of their smaller nonautomotive axles a year or 2 ago.. If the prices are decent it would be interesing
 
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr
Pages: [1]   Go Up
« previous next »