« previous next »
Pages: [1]   Go Down

Author Topic: Dented Shocks  (Read 700 times)

0 Members and 1 Guest are viewing this topic.

jcsanders79

  • Guest
Dented Shocks
« on: May 29, 2007, 07:42:42 PM »
Since I increased my rear pinion angle the spring perches have dented my shocks.  What can I do to fix this besides cut them off and reweld them or do I need to worry about it.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Dented Shocks
« Reply #1 on: May 29, 2007, 08:10:10 PM »
Quote from: jcsanders79 on May 29, 2007, 07:42:42 PM
Since I increased my rear pinion angle the spring perches have dented my shocks.  What can I do to fix this besides cut them off and reweld them or do I need to worry about it.

The other option is to flip the shock upside down.  Your should need to be designed to do this though.  Not all shocks like being upside down.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

jcsanders79

  • Guest
Re: Dented Shocks
« Reply #2 on: May 29, 2007, 08:17:21 PM »
Do you know if rancho rsx is capable?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Dented Shocks
« Reply #3 on: May 29, 2007, 08:37:17 PM »
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline aw12345

  • Member
  • Posts: 3065
    • my jeep picture page
Re: Dented Shocks
« Reply #4 on: May 29, 2007, 10:00:56 PM »
That or buy the extenders for the rear shock lower brackets they are not expensive.

Art
Logged
2006 Jeep Wrangler TJ SE
2004 Jeep Wrangler TJ SE

dunklervogel

  • Guest
Re: Dented Shocks
« Reply #5 on: May 29, 2007, 10:08:12 PM »
This might not be completely true but I've read most gas shocks are okay with being upside down...... hydro/liquid shocks not so much.
Logged
Pages: [1]   Go Up
« previous next »