« previous next »
Pages: [1]   Go Down

Author Topic: vacuum hose  (Read 997 times)

0 Members and 1 Guest are viewing this topic.

Offline chardrc

  • Member
  • Posts: 3535
vacuum hose
« on: October 14, 2007, 11:45:39 AM »
so i was installing a new pcv valve in my jeep yesterday because it was clogged ans forcing oil into my air box. and i noticed 90% of my vacuum lines are cracked and leaky. where do you get new vacuum hoses from.. is it anything special or just normal 1/4" rubber hose?
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline dexetr30

  • 4BangerJP.comŽ Donator
  • Member
  • *
  • Posts: 1261
  • Aloha Mr. Hand!
Re: vacuum hose
« Reply #1 on: October 14, 2007, 05:58:14 PM »
Quote from: chardrc on October 14, 2007, 11:45:39 AM
so i was installing a new pcv valve in my jeep yesterday because it was clogged ans forcing oil into my air box. and i noticed 90% of my vacuum lines are cracked and leaky. where do you get new vacuum hoses from.. is it anything special or just normal 1/4" rubber hose?

I get mine at Advanced Auto, Autozone or Pep Boys. It's just emissions hosing. It's pretty cheap.
Logged
02 2.5.L automatic: 4.0L t.b., 4.0l air intake, K&N filter, Scream'n Demon coil, 8.5mm MSD Super Conductor plug wires, Stage 1 Jet Chip, 29" BFG all terrain KO's. Taurus E-fan, Hummer front bumper, Skyjacker high capacity trans pan, 48" hi-lift, Rubi susp w. 3/4" BB.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14955
Re: vacuum hose
« Reply #2 on: October 14, 2007, 06:16:19 PM »
You should be able to buy it by the foot.  Take one line then measure it out then replace.  DON'T take all the lines out at once.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline dexetr30

  • 4BangerJP.comŽ Donator
  • Member
  • *
  • Posts: 1261
  • Aloha Mr. Hand!
Re: vacuum hose
« Reply #3 on: October 14, 2007, 06:58:38 PM »
Quote from: Jeffy on October 14, 2007, 06:16:19 PM
DON'T take all the lines out at once.

I've heard of people doing that.  :ass: I don't recommend it. lol Although it would make for a good laugh.
Logged
02 2.5.L automatic: 4.0L t.b., 4.0l air intake, K&N filter, Scream'n Demon coil, 8.5mm MSD Super Conductor plug wires, Stage 1 Jet Chip, 29" BFG all terrain KO's. Taurus E-fan, Hummer front bumper, Skyjacker high capacity trans pan, 48" hi-lift, Rubi susp w. 3/4" BB.

Offline chardrc

  • Member
  • Posts: 3535
Re: vacuum hose
« Reply #4 on: October 14, 2007, 07:00:12 PM »
ya i'm planing on buying a few feet of it and replacing 1 by 1 so i don't mess anything up.
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr
Pages: [1]   Go Up
« previous next »