« previous next »
Pages: [1] 2   Go Down

Author Topic: Smittybilt XRC Stuff  (Read 4625 times)

0 Members and 2 Guests are viewing this topic.

TrailsLessTaken

  • Guest
Smittybilt XRC Stuff
« on: April 07, 2009, 08:06:22 AM »
I got my 4WD catalog yesterday and they have some  Smittybilt XRC front fenders and corner guards for the YJ .  The prices are alot cheaper then Posion Spyder was.  Is Smittybilt a pretty good brand, none of the guys I know have anything from them.  I found through Smittybilts website a place online called 4wheelonline.com that carries them alot cheaper then 4wd does.  The rear corners are about $290 and the front fenders are about $324 and that includes a built in 3" flare and black powder coating

Front Fenders
Rear Corners
« Last Edit: April 07, 2009, 08:07:02 AM by TrailsLessTaken »
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Smittybilt XRC Stuff
« Reply #1 on: April 07, 2009, 12:48:58 PM »
Smittybilt isn't the same smittybilt from years past.  Smittybilt is owned by Lund Holding who makes truck tops and some other things.  I'm not sure if they make their own stuff anymore or are just a marketing house for smaller shops.

The only concern I have is the metals thickness.  That's where they can cheap out.  Poison Spyder is designed to take a real beating.  I'm not sure about Smittybilt.  Although at one time I was considering their tube fenders but then they reorganized.
« Last Edit: April 07, 2009, 12:51:45 PM by Jeffy »
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

TrailsLessTaken

  • Guest
Re: Smittybilt XRC Stuff
« Reply #2 on: April 07, 2009, 01:04:47 PM »
It says it is manufactured from 1.5" x .120 wall tubing and 3/16 plate. So that sounds like it would be pretty good, if anything it has to be better or as good as the stock fenders and the back your just adding another layer of steel on.  Plus my tires stick out about 6" on each side of the jeep so they will hit a tree before the fender flare would hit
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Smittybilt XRC Stuff
« Reply #3 on: April 07, 2009, 06:44:36 PM »
3/16" is the norm I think.  For HD stuff it's 1/4" though.  I'd be sure to check the paint on the panels and probably repaint them.  Then I'd seal the panels to the body so crap doesn't get trapped back there and rust.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Jesse-James

  • Guest
Re: Smittybilt XRC Stuff
« Reply #4 on: April 07, 2009, 07:21:53 PM »
Who makes 1/4" armor?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Smittybilt XRC Stuff
« Reply #5 on: April 07, 2009, 07:31:09 PM »
Quote from: Jesse-James on April 07, 2009, 07:21:53 PM
Who makes 1/4" armor?
Hmm, maybe I'm wrong on my numbers.  I could have sworn there were some companies making them out of 1/4" plate.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Jesse-James

  • Guest
Re: Smittybilt XRC Stuff
« Reply #6 on: April 07, 2009, 07:52:06 PM »
I don't doubt ya', I'm just curious. I'd like to see some 1/4" corners.
Logged

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Smittybilt XRC Stuff
« Reply #7 on: April 07, 2009, 10:15:42 PM »
Most corners and rockers are 3/16.
For tube fenders the sheet metal is about 1/8th. Not sure the gauge maybe 14. Might vary between the various MFG'ers.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline aw12345

  • Member
  • Posts: 3065
    • my jeep picture page
Re: Smittybilt XRC Stuff
« Reply #8 on: April 08, 2009, 05:22:15 AM »
2 friends of mine have the smitty built full rear corners with fender flares they fit fine and you cannot go wrong for the price same goes for the front tube fenders not the greatest ever but about the same quality that I have seen from other manufacturers for a lot less money. The ones I am talking about are on TJ;s but they are not a bad product for the price.

Here is a pic of the rear corner

http://picasaweb.google.com/aartw12345/HairyCrackTrail#5297661598470181954

<table style="width:auto;"><tr><td></td></tr><tr><td style="font-family:arial,sans-serif; font-size:11px; text-align:right">From Hairy crack trail</td></tr></table>

and this one has the same rear corners and the smitty built tube fenders

http://picasaweb.google.com/aartw12345/2n17xAndDishpan#5321489991318104578

<table style="width:auto;"><tr><td></td></tr><tr><td style="font-family:arial,sans-serif; font-size:11px; text-align:right">From 2n17x and Dishpan</td></tr></table>

About the only thing I do not like is the crinkle type paint the first guy sanded them down and painted them regular black
Logged
2006 Jeep Wrangler TJ SE
2004 Jeep Wrangler TJ SE

TrailsLessTaken

  • Guest
Re: Smittybilt XRC Stuff
« Reply #9 on: April 08, 2009, 06:43:53 AM »
Thanks, I think I might just have to get me a set.  I think I will get some ordered here in the next couple weeks once I get a couple side jobs dones.  Like you said AW for the price it's not a bad deal. 
Logged

goldenyj

  • Guest
Re: Smittybilt XRC Stuff
« Reply #10 on: April 08, 2009, 08:36:43 AM »
Sadly Poison Spyder is closed, so even though they made some good stuff, something was wrong.
Logged

Jesse-James

  • Guest
Re: Smittybilt XRC Stuff
« Reply #11 on: April 08, 2009, 08:39:03 AM »
Logged

TrailsLessTaken

  • Guest
Re: Smittybilt XRC Stuff
« Reply #12 on: April 08, 2009, 08:40:18 AM »
Quote from: goldenyj on April 08, 2009, 08:36:43 AM
Sadly Poison Spyder is closed, so even though they made some good stuff, something was wrong.

Thats what I was orginally going to buy, but at the same time these are alot less.  Its a shame they closed they made some good stuff
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Smittybilt XRC Stuff
« Reply #13 on: April 08, 2009, 09:25:55 AM »
Interesting that they are now in CA.  Although, with the high sales tax, that also sucks.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

TrailsLessTaken

  • Guest
Re: Smittybilt XRC Stuff
« Reply #14 on: April 08, 2009, 01:09:37 PM »
Im curious to see what direction they go with company, I would like to get one of their roll cages if they are still going to keep the same design to finish out mine
Logged
Pages: [1] 2   Go Up
« previous next »