« previous next »
Pages: [1]   Go Down

Author Topic: Replaced engine mounts and brackets  (Read 1192 times)

0 Members and 5 Guests are viewing this topic.

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Replaced engine mounts and brackets
« on: April 19, 2009, 01:43:08 PM »
So, I finally got around to doing this.  Last weekend it was the driver's side that got done, and yesterday it was the passanger's side's turn.  I got the Brown Dog industries mounts and brackets, and I have to say they look strong!  They are also easier to work with than the stock parts - Especially on the passanger's side, where some bolts are a ROYAL PITA to get to!  By the way, here's how my stock mounts looked:

This one is what prompted me to order the new mounts...



Here's the driver's side once it came out...





And the passanger's side one...





And here's the replacement (did not take pics of the passanger's side, but it's basically the same thing)...





I do feel a lot more vibrations now on the Jeep (I ordered the soft rubber ones, but still it has more vibes) bot on the other hand, the jeep does seem to take off faster from a dead stop.  I am happy with the results so far.

Felipe

PS: sorry about the crappy pictures, but I only had my phone on hand...
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Replaced engine mounts and brackets
« Reply #1 on: April 19, 2009, 02:57:45 PM »
Quote from: jfrabat on April 19, 2009, 01:43:08 PM
So, I finally got around to doing this.  Last weekend it was the driver's side that got done, and yesterday it was the passanger's side's turn.  I got the Brown Dog industries mounts and brackets, and I have to say they look strong!  They are also easier to work with than the stock parts - Especially on the passanger's side, where some bolts are a ROYAL PITA to get to!  By the way, here's how my stock mounts looked:

And the passanger's side one...



Felipe

PS: sorry about the crappy pictures, but I only had my phone on hand...

Hmm, that's what teh bracket is supposed to look like...  The OEM replacements are a HUGE improvemnent.  Can you tell me what size the center stud is?  I think it's Metric but not certain.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chardrc

  • Member
  • Posts: 3535
Re: Replaced engine mounts and brackets
« Reply #2 on: April 19, 2009, 08:06:58 PM »
Quote from: jfrabat on April 19, 2009, 01:43:08 PM
S
This one is what prompted me to order the new mounts...




ok so in that picture where is that bracket thing that always brakes? looks to me like the mount is bolted directly to the frame mount. or am i missing something / that bracket is only on the drivers side?
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Replaced engine mounts and brackets
« Reply #3 on: April 20, 2009, 06:56:57 AM »
Quote from: Jeffy on April 19, 2009, 02:57:45 PM
Hmm, that's what teh bracket is supposed to look like...  The OEM replacements are a HUGE improvemnent.  Can you tell me what size the center stud is?  I think it's Metric but not certain.


The stock or the new one?  The stock one I also thik it is metric, but the new one I think is SAE...  I can measure it for you if you want.
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Replaced engine mounts and brackets
« Reply #4 on: April 20, 2009, 07:53:17 PM »
The stock one.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Replaced engine mounts and brackets
« Reply #5 on: April 20, 2009, 08:08:03 PM »
Quote from: Jeffy on April 20, 2009, 07:53:17 PM
The stock one.

OK, I'll measure it tomorow...
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline cwildmann

  • Newbie
  • Posts: 12
Re: Replaced engine mounts and brackets
« Reply #6 on: April 20, 2009, 08:14:06 PM »
Glad to hear that someone else got noticeable vibes other than me.  I recently installed the MML with rubber and new engine brackets from Brown Dog and had what I thought were major engine vibes.  I guess it's normal since there is less rubber to absorb the vibrations as compared to the stock MM.  Good job.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Replaced engine mounts and brackets
« Reply #7 on: April 20, 2009, 08:32:58 PM »
Quote from: chardrc on April 19, 2009, 08:06:58 PM
ok so in that picture where is that bracket thing that always brakes? looks to me like the mount is bolted directly to the frame mount. or am i missing something / that bracket is only on the drivers side?
You're missing something because that is the driver side mount not the passenger side, where the extra piece is.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chardrc

  • Member
  • Posts: 3535
Re: Replaced engine mounts and brackets
« Reply #8 on: April 20, 2009, 09:19:47 PM »
fail i thought it was passenger side becasue it would be easier to take a picture of.. but ounce i actually looked at the surroundings its painfully obvious...  i looked in the parts catalog for 1988-90 and it doesn't show that extra part anywhere... and mine is currently secured pretty much exactly like the one in the drivers side picture, directly to the frame hoop thing with the 1 stud from the mount and 1 bolt... (is it possible that the early yj's didn't use that piece is my point i think) im going to stop talking now so that i don't over cluder this thread anymore  :wall:
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Replaced engine mounts and brackets
« Reply #9 on: April 21, 2009, 08:23:38 AM »
Quote from: chardrc on April 20, 2009, 09:19:47 PM
fail i thought it was passenger side becasue it would be easier to take a picture of.. but ounce i actually looked at the surroundings its painfully obvious...  i looked in the parts catalog for 1988-90 and it doesn't show that extra part anywhere... and mine is currently secured pretty much exactly like the one in the drivers side picture, directly to the frame hoop thing with the 1 stud from the mount and 1 bolt... (is it possible that the early yj's didn't use that piece is my point i think) im going to stop talking now so that i don't over cluder this thread anymore  :wall:

It does not appear to be there, but trust me, it is...
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Replaced engine mounts and brackets
« Reply #10 on: April 21, 2009, 11:21:22 AM »
Brown Dog doesn't offer the cradle for '87-'90 2.5L either. http://browndogindustries.com/2-5l-i4-1987-1990.aspx
Logged

TrailsLessTaken

  • Guest
Re: Replaced engine mounts and brackets
« Reply #11 on: April 21, 2009, 11:38:24 AM »
Did you order the regular height ones or the ones with the 1" lift on them
Logged

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Replaced engine mounts and brackets
« Reply #12 on: April 21, 2009, 02:41:43 PM »
Quote from: TrailsLessTaken on April 21, 2009, 11:38:24 AM
Did you order the regular height ones or the ones with the 1" lift on them

Stock height...
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Replaced engine mounts and brackets
« Reply #13 on: April 21, 2009, 04:38:17 PM »
Quote from: Jeffy on April 20, 2009, 07:53:17 PM
The stock one.

I checked it, and it is metric (1.5)
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost
Pages: [1]   Go Up
« previous next »