I'll take a quick picture once I get back home (this weekend)... But basically I copied of
this one:
What you will need is a 2" EMT conduit clamp and a 2" tension band (make sure you smooth them out t avoid ripping the padding on the bar!); I used one like this for the base (obviously the size is wrong, but you get the idea):
And one like this for the top (I used a long stud with a lock nut to tighten it to the rollbar, then put a washer on eiter side of the highlift, then a winged nut o hold the high lift in place):
Bought everything at Home Depot for under $10 (the list included the two clamps, all bolts, washers, lock nuts and winged nuts). I also used sray un bed liner to paint them black so they would not stick out like a sore thumb inside the cab!
Felipe
