« previous next »
Pages: [1] 2   Go Down

Author Topic: These look impressive  (Read 3829 times)

0 Members and 5 Guests are viewing this topic.

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
These look impressive
« on: February 06, 2010, 06:52:49 AM »
This is a great idea....I would consider these if I hadn't already gone with steel two years ago...look great IMHO.   :thumbsup:

http://www.jeepsunlimited.com/forums/showthread.php?t=517435
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline chardrc

  • Member
  • Posts: 3535
Re: These look impressive
« Reply #1 on: February 06, 2010, 08:41:05 AM »
wonder how flexible they would be at -20.....  but they do look good and i like the jk turn marker solution that he did.
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: These look impressive
« Reply #2 on: February 06, 2010, 09:56:39 AM »
 :thumbsup: I wish they had a YJ version.  :hitit:
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: These look impressive
« Reply #3 on: February 06, 2010, 12:06:20 PM »
I saw picts of these a few weeks back when they were super secret.  I wonder how well they hold their form at highway speeds.  They don't look too thick and there doesn't seem to be any strengthing to them other then the trimmed fender.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: These look impressive
« Reply #4 on: February 06, 2010, 01:14:21 PM »
Actually, there probably isn't enough drag on them to bend.

I like how the thread ends with Moz getting dissed on page 3.   :lol:
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: These look impressive
« Reply #5 on: February 06, 2010, 03:20:56 PM »
Quote from: FourbangerYJ on February 06, 2010, 09:56:39 AM
:thumbsup: I wish they had a YJ version.  :hitit:

why wouldn't they fit on a YJ? - i think they'll fit just fine, most likely the vertical trim line needs to be back a bit more (towards the door so you'll need to cut the hole length not just at the top.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Jesse-James

  • Guest
Re: These look impressive
« Reply #6 on: February 06, 2010, 04:00:48 PM »
I'm tempted to order a set and see if I can get them to work with my CJ fenders.
Logged

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: These look impressive
« Reply #7 on: February 06, 2010, 04:12:10 PM »
Quote from: Jesse-James on February 06, 2010, 04:00:48 PM
I'm tempted to order a set and see if I can get them to work with my CJ fenders.

not sure about the radius on the edge - if it's the same with the YJ should prolly work but for some reason i think that is not as sharp as the yj/tj fenders so that might not fit. also, not sure how far out from the edge of the front grill or the front of the hood is the edge of the fender, you should compare that with a TJ, if the top of the fender is wider the edge of these might not be covered by the hood (i think the hood width is narrower in front compared to a TJ or YJ)
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: These look impressive
« Reply #8 on: February 06, 2010, 04:22:35 PM »
I'm sure the guy will eventually have YJ and CJ versions.  Might want to email them.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: These look impressive
« Reply #9 on: February 06, 2010, 07:33:05 PM »
Quote from: Jeffy on February 06, 2010, 01:14:21 PM
Actually, there probably isn't enough drag on them to bend.

I like how the thread ends with Moz getting dissed on page 3.   :lol:

bah....me no get dissed...
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: These look impressive
« Reply #10 on: February 06, 2010, 09:29:51 PM »
E-mail sent.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Jesse-James

  • Guest
Re: These look impressive
« Reply #11 on: February 06, 2010, 10:49:16 PM »
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: These look impressive
« Reply #12 on: February 06, 2010, 11:06:32 PM »
Quote from: sharpxmen on February 06, 2010, 03:20:56 PM
why wouldn't they fit on a YJ? - i think they'll fit just fine, most likely the vertical trim line needs to be back a bit more (towards the door so you'll need to cut the hole length not just at the top.
There is another issue.  YJ's use two holes for the hood latch.  TJ's have one and two alignment holes.  Personally, I'd rather have TJ style as they are easier to latch.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Jesse-James

  • Guest
Re: These look impressive
« Reply #13 on: February 07, 2010, 05:29:43 AM »
Just got this back from them, guess I'll wait a bit.


Quote
Hi JJ,
 
Thanks for your interest!  We do have plans to make these for the CJs.  :)   I am not sure yet on an ETA, but these are very high on the list!
 
 
thanks again,
 
Mike
Logged

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: These look impressive
« Reply #14 on: February 07, 2010, 10:38:29 AM »
Quote from: Jesse-James on February 07, 2010, 05:29:43 AM
Just got this back from them, guess I'll wait a bit.



I got something along those lines too, but for YJ.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:
Pages: [1] 2   Go Up
« previous next »