Author Topic: Need a new radiator soon  (Read 4507 times)

0 Members and 7 Guests are viewing this topic.

haulincats

  • Guest
Need a new radiator soon
« on: April 01, 2010, 07:08:30 AM »
My radiator doesn't leak yet but it doesn't look very good.
I want to replace it before it starts leaking with an aluminum one?
Where is a good place to buy one. I do have a 4 cylinder with an auto trans.
Thanks,
Vance

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Need a new radiator soon
« Reply #1 on: April 01, 2010, 07:26:44 AM »
Why aluminum?  Seems like a lot of extra $$$ when the stock ones work fine.
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Need a new radiator soon
« Reply #2 on: April 01, 2010, 10:40:21 AM »
You can get a 2 core aluminum for as much or less then a copper and brass on ebay.  With all of the inexpensive aluminum radiators, it's hard to choose a copper and brass one.

If your radiator fins are all rusted out then it's a good idea to replace it.  Mine would crumble if you touched them.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Need a new radiator soon
« Reply #3 on: April 01, 2010, 02:52:03 PM »
The stock type replacement I bought cost $120 - how much are you getting direct fit aluminum radiators for?
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Need a new radiator soon
« Reply #4 on: April 01, 2010, 02:55:45 PM »
The stock type replacement I bought cost $120 - how much are you getting direct fit aluminum radiators for?

i think i paid $125 for mine shipped for a 2 core all aluminum with welded tanks off ebay. Stock ones with plastic tanks are about $70 or so new on ebay (or they were that much when i got mine).
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Need a new radiator soon
« Reply #5 on: April 01, 2010, 03:21:03 PM »
Mines all metal with a tranny cooler, the one I pulled out may have had plastic tanks.
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

haulincats

  • Guest
Re: Need a new radiator soon
« Reply #6 on: April 01, 2010, 04:39:49 PM »
You can get a 2 core aluminum for as much or less then a copper and brass on ebay.  With all of the inexpensive aluminum radiators, it's hard to choose a copper and brass one.

If your radiator fins are all rusted out then it's a good idea to replace it.  Mine would crumble if you touched them.
That is how mine is. It is not leaking but with summer / hot weather coming I want to
replace it before it starts.
Thanks,
Vance

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Need a new radiator soon
« Reply #7 on: April 01, 2010, 05:52:40 PM »
From what I've seen, the aluminum YJ/CJ radiators are around $130 shipped for a 2-core. 3 core are around $200.

On a similar subject, everyone makes a big deal about number of cores which makes it a bit confusing.  I think I've seen up to 4 cores.  3 cores seem to be popular with copper/brass.  Although 2 core is the norm for most OE radiators.  Aluminum come in 2 core with some offering 3 core.  I would guess that more cores allows for more surface area but then you're using smaller tubes.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Need a new radiator soon
« Reply #8 on: April 01, 2010, 09:29:57 PM »
From what I've seen, the aluminum YJ/CJ radiators are around $130 shipped for a 2-core. 3 core are around $200.

On a similar subject, everyone makes a big deal about number of cores which makes it a bit confusing.  I think I've seen up to 4 cores.  3 cores seem to be popular with copper/brass.  Although 2 core is the norm for most OE radiators.  Aluminum come in 2 core with some offering 3 core.  I would guess that more cores allows for more surface area but then you're using smaller tubes.

the stock one i had on i think it had 1 core and was 5/8'' thick (at the fins) - still have it in a corner, i'll have a look at it to confirm.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Need a new radiator soon
« Reply #9 on: April 01, 2010, 09:35:10 PM »
the stock one i had on i think it had 1 core and was 5/8'' thick (at the fins) - still have it in a corner, i'll have a look at it to confirm.
I think my original was a 1 core with really wide tubes.  My current one is a 2 core with smaller tubes.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: Need a new radiator soon
« Reply #10 on: April 03, 2010, 08:08:36 AM »
So ebay is the place to get one?  Mine is looking bad too, lots of staining around the metal - plastic contact area...although it seems to work just fine.
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end


Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Need a new radiator soon
« Reply #13 on: April 03, 2010, 07:24:14 PM »
What about one for my 98 2.5 with an auto?
Thanks,
Vance

i think they're the same rad, but here's the one listed for your year - $140 with free shipping (i bought the same one for $125 so you might want to shop around) this one is a 2 row, almost 2'' thick and has tranny cooler
http://cgi.ebay.com/ebaymotors/97-98-99-00-01-JEEP-WRANGLER-YJ-ALL-ALUMINUM-RADIATOR_W0QQitemZ250511631234QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item3a53a82382#ht_4209wt_939
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline chardrc

  • Member
  • Posts: 3535
Re: Need a new radiator soon
« Reply #14 on: April 03, 2010, 07:35:44 PM »
$125 for a jeep radiator sounds like a steel compared to the $300 radiator i had to buy for my atv during the winter Polaris must think their parts are made of gold... come to think of it my jeep could use a new radiator.
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr