« previous next »
Pages: 1 [2]   Go Down

Author Topic: Repacking bearings W/ grease  (Read 3208 times)

0 Members and 7 Guests are viewing this topic.

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Repacking bearings W/ grease
« Reply #15 on: June 23, 2010, 09:48:38 PM »
Quote from: Jeffy on June 23, 2010, 05:20:22 PM
As long as it doesn't involve actually working on my Jeep, I'm OK with it.   :lol:

If I work on it, it proably won't work once I'm done  :crap:
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Repacking bearings W/ grease
« Reply #16 on: June 24, 2010, 02:37:45 PM »
sorry for my ignorance but which bearings are you guys packing with grease on a YJ?
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Repacking bearings W/ grease
« Reply #17 on: June 24, 2010, 02:51:55 PM »
Quote from: sharpxmen on June 24, 2010, 02:37:45 PM
sorry for my ignorance but which bearings are you guys packing with grease on a YJ?
"I am planning on taking the outer bearings of the front end out"
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Repacking bearings W/ grease
« Reply #18 on: June 24, 2010, 03:05:46 PM »
Quote from: Jeffy on June 24, 2010, 02:51:55 PM
"I am planning on taking the outer bearings of the front end out"

oh, ok - i am guessing he's not on a D30 then
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Repacking bearings W/ grease
« Reply #19 on: June 24, 2010, 05:30:04 PM »
Quote from: sharpxmen on June 24, 2010, 03:05:46 PM
oh, ok - i am guessing he's not on a D30 then

D44 with hubs not unit bearings.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Repacking bearings W/ grease
« Reply #20 on: June 24, 2010, 07:01:48 PM »
Quote from: FourbangerYJ on June 24, 2010, 05:30:04 PM
D44 with hubs not unit bearings.

gotcha

kept trying to figure out where you'd find a bearing that you have to pack on the YJ and came up short :) - steering column was the best i could come up with :lol:
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Repacking bearings W/ grease
« Reply #21 on: June 25, 2010, 02:50:21 PM »
Parts came in. Parts Mike is a great company to buy from! Good prices and service!  :thumbsup:

Got it put back together. Torqued the outer nut to 150# Once the tires are on I can move it to check the other side. I have a feeling the jam nut will be loose.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Repacking bearings W/ grease
« Reply #22 on: June 27, 2010, 08:47:05 PM »
Quote from: Quyjeeper on June 27, 2010, 01:59:08 PM
Even if you were gonna pack new grease mixing it into old grease, remember to use the same grease that was in it before. Each type of grease has a different soap type.

Yep, same brand of grease.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:
Pages: 1 [2]   Go Up
« previous next »