Author Topic: Transmission for my 97 TJ 4 banger  (Read 1622 times)

0 Members and 4 Guests are viewing this topic.

Contra

  • Guest
Transmission for my 97 TJ 4 banger
« on: July 01, 2010, 08:59:21 PM »
new here, and glade I found this place


I would like to get a new trans for my 97 TJ, currently I have a 3 speed auto and would love to get a 4 speed auto from a I6
would I have to use a different transfer case or would mine bolt up
or would I have to use an adapter such as I will have to use for the engine to bolt up to the trans?

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Transmission for my 97 TJ 4 banger
« Reply #1 on: July 01, 2010, 09:52:42 PM »
A 4-speed won't bolt up.  2.5L's and 4.0L's use different bell housing bolt patterns.  The 4-speed found in later TJ's was because they went from the 2.5L to the 2.4L which shares the 4.0L bell housing bolt pattern.
« Last Edit: July 01, 2010, 09:52:56 PM by Jeffy »
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Contra

  • Guest
Re: Transmission for my 97 TJ 4 banger
« Reply #2 on: July 04, 2010, 02:12:45 AM »
so is it worth getting my trans rebuilt or can I use a different trans (with the help of an adapter plate)


Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Transmission for my 97 TJ 4 banger
« Reply #3 on: July 04, 2010, 10:27:01 AM »
so is it worth getting my trans rebuilt or can I use a different trans (with the help of an adapter plate)



Is there something wrong with yours, or are you looking for an auto with overdrive?
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Contra

  • Guest
Re: Transmission for my 97 TJ 4 banger
« Reply #4 on: July 04, 2010, 12:56:02 PM »
it is starting to slip, (I think it is a sensor)
so I dont really wanna repair it i would rather not put money into it as I wont be happy with it anyway
I really want to get a stronger built trans as I kinda make it work harder than most drivers do
and over drive would be a plus, so a higher highway speed with less RPM would be great!

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Transmission for my 97 TJ 4 banger
« Reply #5 on: July 07, 2010, 05:50:20 AM »
I think they're pretty rare but a Cherokee with a 4cyl and auto should be the sweet AW4 transmission, a 4spd auto with an OD gear.  Google 'AW4 swap" and you will get some good info.

Offline jagular7

  • Member
  • Posts: 987
Re: Transmission for my 97 TJ 4 banger
« Reply #6 on: July 07, 2010, 12:25:51 PM »
Mid-90s Dakotas ran the 2.5l engine. Many in front of a AX-15 so that is a typical swap for swapping manuals trans. I would think an auto from the same typical truck would also work in the Jeep. Just make sure you get the 4wd model. The output should be the same as your Jeep auto with 23-spline. Only issue I can see that may come up is the depthness of the shaft. Meaning the length of the trans output and the length of the tcase input.
Jagular7
97 SE - Rubbered and locked for fun
94 SE - stock, collecting parts for 37s

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: Transmission for my 97 TJ 4 banger
« Reply #7 on: July 08, 2010, 12:50:33 AM »
The 4spd auto is longer than the 3 spd the one from the XJ won't fit unless you
move the motor forward or are happy with a 2" driveline in the rear...

Dave
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Transmission for my 97 TJ 4 banger
« Reply #8 on: July 08, 2010, 03:34:45 AM »
The 4spd auto is longer than the 3 spd the one from the XJ won't fit unless you
move the motor forward or are happy with a 2" driveline in the rear...

Dave
The AW4 is becoming quite popular in Wranglers, both in the 4cyl and 6cyl, with sufficient length rear driveshafts.

Contra

  • Guest
Re: Transmission for my 97 TJ 4 banger
« Reply #9 on: July 08, 2010, 07:43:15 AM »
thanks for all the advice guys
bu I am going to the dark side (in a big way)

I have a 5.2 and trans and thay and the axles are gonna go under my jeep frame soon (just gotta buy an arc welder)
so problem solved...thanks anyway

I guess I gottta leave the club when this happens

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Transmission for my 97 TJ 4 banger
« Reply #10 on: July 08, 2010, 08:39:49 AM »
thanks for all the advice guys
bu I am going to the dark side (in a big way)

I have a 5.2 and trans and thay and the axles are gonna go under my jeep frame soon (just gotta buy an arc welder)
so problem solved...thanks anyway

I guess I gottta leave the club when this happens

we'll just think of you as having 2 4bangers under the hood
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Contra

  • Guest
Re: Transmission for my 97 TJ 4 banger
« Reply #11 on: July 08, 2010, 08:03:02 PM »
lol...8 ticked-off racoons

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: Transmission for my 97 TJ 4 banger
« Reply #12 on: July 08, 2010, 11:47:42 PM »
Rabid Squirrels? :biggrin:

Dave
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio