« previous next »
Pages: [1] 2   Go Down

Author Topic: This is why it pays to have good axles...  (Read 3287 times)

0 Members and 5 Guests are viewing this topic.

Sine Deviance

  • Guest
This is why it pays to have good axles...
« on: July 14, 2010, 10:40:20 AM »
Logged

Torch_Ind

  • Guest
Re: This is why it pays to have good axles...
« Reply #1 on: July 14, 2010, 10:51:57 AM »
Quote from: Sine Deviance on July 14, 2010, 10:40:20 AM
http://www.youtube.com/watch?v=DfQy855nE3o

would help not jumping it at mock chicken!!!  get some gears and crawl up it.
Logged

Offline neale_rs

  • Member
  • Posts: 3583
Re: This is why it pays to have good axles...
« Reply #2 on: July 14, 2010, 11:02:03 AM »
Amazing how he keeps driving it without a wheel!
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline jfrabat

  • Gargantuan Mango Tree MechanicŪ
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: This is why it pays to have good axles...
« Reply #3 on: July 14, 2010, 11:29:26 AM »
Ouch!  not the best driving I have seen, though, but I would not have expected the little jump to cause such a huge problem...
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: This is why it pays to have good axles...
« Reply #4 on: July 14, 2010, 12:36:07 PM »
A 'good' axle doesn't fix 'stupid'.

That 'little' jump wasn't little.  He was really on the throttle and didn't let off when he was in the air.  I'd guess 3-4000 RPM.  With the slope and ALL of the weight going onto the axle as it's spinning, he's just asking for it to break.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Torch_Ind

  • Guest
Re: This is why it pays to have good axles...
« Reply #5 on: July 14, 2010, 12:44:05 PM »
Quote from: Jeffy on July 14, 2010, 12:36:07 PM
A 'good' axle doesn't fix 'stupid'.

That 'little' jump wasn't little.  He was really on the throttle and didn't let off when he was in the air.  I'd guess 3-4000 RPM.  With the slope and ALL of the weight going onto the axle as it's spinning, he's just asking for it to break.

+1

If you watch it again you can she his front axle shifts rearward at impact and then shoots the jeep strait up. he is lucky it didn't just stop him dead or worse have the front end go head over tea kettle.

I hate wheeling with guys who do this constant.  I have a few that always have something to prove and i don't wheel with them anymore.
« Last Edit: July 14, 2010, 12:48:42 PM by Torch_Ind »
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: This is why it pays to have good axles...
« Reply #6 on: July 14, 2010, 01:17:41 PM »
This is a better angle.

<a href="http://www.youtube.com/v/TwXWX8EqiHM" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://www.youtube.com/v/TwXWX8EqiHM</a>
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: This is why it pays to have good axles...
« Reply #7 on: July 14, 2010, 01:20:04 PM »
he's on 2wd the whole time
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Sine Deviance

  • Guest
Re: This is why it pays to have good axles...
« Reply #8 on: July 14, 2010, 02:11:22 PM »
Quote from: Jeffy on July 14, 2010, 12:36:07 PM
A 'good' axle doesn't fix 'stupid'.

Also true, but I think he must have had stock axles for the rear one to pop that fast.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: This is why it pays to have good axles...
« Reply #9 on: July 14, 2010, 02:34:05 PM »
Quote from: Sine Deviance on July 14, 2010, 02:11:22 PM
Also true, but I think he must have had stock axles for the rear one to pop that fast.
It was a Dana 35c or maybe a D44A in any case unless he had a 9 or a 60 he's be spitting out axles. And even then it's still not a sure bet.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chrisfranklin

  • 4BangerJP.comŪ Donator
  • Member
  • *
  • Posts: 1276
Re: This is why it pays to have good axles...
« Reply #10 on: July 14, 2010, 03:27:12 PM »
Told those guys I could bust the rear end and roll that Grand Cherokee in one go.  The dollars I won in the bet paid for the flight back from Czechoslovakia, too.    :biggrin:
« Last Edit: July 14, 2010, 03:27:59 PM by chrisfranklin »
Logged
'94 YJ S 5spd, Borla Exhaust, CarSound Cat., PS Ceramic-coated Headers, Airraid intake, 62mm TB, Intake Manifold bored/ceramic-coated, 19lb injectors, Sharp's Adj. FPR, MeanGreen Starter, D30 Aussie locker, 31" Destination MTs, Warn XD9000, Cibie headlights, armor

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: This is why it pays to have good axles...
« Reply #11 on: July 14, 2010, 04:05:45 PM »
Quote from: chrisfranklin on July 14, 2010, 03:27:12 PM
Told those guys I could bust the rear end and roll that Grand Cherokee in one go.  The dollars I won in the bet paid for the flight back from Czechoslovakia, too.    :biggrin:
Actually, I don't think you're far off from the sound of the comments being made.  It seems the owner has a shop or at least a few more jeeps.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: This is why it pays to have good axles...
« Reply #12 on: July 14, 2010, 09:44:12 PM »
Quote from: sharpxmen on July 14, 2010, 01:20:04 PM
he's on 2wd the whole time
How do you know this?

For anybody considering airing their jeep out, I've rebuilt many transfer cases from jeeps that had been jumped.  One axle lands first and the spinning wheels stop quickly, while inertia keeps the wheels on the axle in the air spinning.  The weak point between the two axles is often the transfer case mainshaft right at the speedo gear.
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: This is why it pays to have good axles...
« Reply #13 on: July 14, 2010, 09:48:54 PM »
Quote from: Bounty Hunter on July 14, 2010, 09:44:12 PM
How do you know this?


in the second video Jeffy posted he spins the rear wheels

Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: This is why it pays to have good axles...
« Reply #14 on: July 14, 2010, 10:32:15 PM »
I watched it again.  Looks like he broke both axles.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."
Pages: [1] 2   Go Up
« previous next »