Author Topic: Steering stabilizer  (Read 2418 times)

0 Members and 1 Guest are viewing this topic.

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Steering stabilizer
« Reply #15 on: August 08, 2010, 12:29:26 PM »
Look at competition level rigs. They also don't have them. They endure far more abuse than a weekend warrior could reasonably dish out...
Poor analogy as most comp rigs have full hydraulic steering or hydro assist, in which the hydraulic cylinder serves the same purpose to dampen harsh unwanted steering input as a stabilizer would.

AGUHR

  • Guest
Re: Steering stabilizer
« Reply #16 on: August 09, 2010, 06:42:42 AM »
I didn't add the stabilizer yet and drove a 2 hour ride up to a wheeling spot and wheeled for 5 hours and drove home.

Off road - didnt notice any difference with it or not.

On the road about 60mph it is a little jerky. But,for $50 I'll probably go ahead and add it,

Clem

  • Guest
Re: Steering stabilizer
« Reply #17 on: August 09, 2010, 11:20:28 AM »
Full hydraulic steering serves to point the wheels on full on competition rigs. Nothing more. What pressure is that pump putting out? The more rpms, full hydro likes to "walk".

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Steering stabilizer
« Reply #18 on: August 09, 2010, 02:51:19 PM »
Full hydraulic steering serves to point the wheels on full on competition rigs. Nothing more. What pressure is that pump putting out? The more rpms, full hydro likes to "walk".
It's also hydraulic, and dampens side forces just as a 'hydraulic' steering stabilizer does.

Clem

  • Guest
Re: Steering stabilizer
« Reply #19 on: August 09, 2010, 05:49:27 PM »
A shock absorber is not the same as a hydraulic piston.

jdarg

  • Guest
Re: Steering stabilizer
« Reply #20 on: August 13, 2010, 02:47:41 PM »
Its probably most commonly a band-aid or fail-safe, but it does have a purpose offroad. I've heard of folks busting fingers, esp. on the old CJ steering wheels, because the tires hit something and put feedback into the steering steering wheel so quickly & forcefully. AMC wheels had those little holes you could put your fingers in.
« Last Edit: August 13, 2010, 02:48:16 PM by jdarg »

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Steering stabilizer
« Reply #21 on: August 13, 2010, 04:41:02 PM »
Its probably most commonly a band-aid or fail-safe, but it does have a purpose offroad. I've heard of folks busting fingers, esp. on the old CJ steering wheels, because the tires hit something and put feedback into the steering steering wheel so quickly & forcefully. AMC wheels had those little holes you could put your fingers in.
I doubt a stabilizer will prevent that.  That's why you drive with your thumbs out and not wrapped around the wheel.  Even a YJ wheel can break your thumbs.
« Last Edit: August 13, 2010, 07:03:09 PM by Jeffy »
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Steering stabilizer
« Reply #22 on: August 13, 2010, 05:23:31 PM »
Prevent, no.  Minimize the risk, definitely.