« previous next »
Pages: 1 ... 3 4 [5] 6 7 ... 9   Go Down

Author Topic: Skinny's/Pizza Cutter's/Expo/etc... Thread  (Read 39230 times)

0 Members and 10 Guests are viewing this topic.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #60 on: February 11, 2011, 08:28:46 PM »
Here's a YJ on 34x10.5R15 Interco Super Swamper LTB's.  It's on a D44 front D60 rear.  I like the axles and the wheels...  Probably 15x7's for the wheels since they look OE.  Axles are probably from a Cab & Chassis :thumb:

Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #61 on: February 12, 2011, 08:21:57 AM »
Quote from: Jeffy on February 11, 2011, 08:28:46 PM
Here's a YJ on 34x10.5R15 Interco Super Swamper LTB's.  It's on a D44 front D60 rear.  I like the axles and the wheels...  Probably 15x7's for the wheels since they look OE.  Axles are probably from a Cab & Chassis :thumb:



On that size tire it would be a axle dragger! Looks OK but that 60 or 14B is hanging low.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #62 on: February 12, 2011, 10:50:31 AM »
Quote from: FourbangerYJ on February 12, 2011, 08:21:57 AM
On that size tire it would be a axle dragger! Looks OK but that 60 or 14B is hanging low.
I seen to remember that you can shave the D60 an inch or so without having to drastically cut into the housing.  Then the clearance is about the same as the D44.  Although I think I'd rather have a FF D44 rear I think.  Too bad they are scarce now.  They used to be all the rage before everyone started going 60 and 14.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #63 on: February 14, 2011, 10:28:58 AM »
Quote from: Jeffy on February 12, 2011, 10:50:31 AM
I seen to remember that you can shave the D60 an inch or so without having to drastically cut into the housing.  Then the clearance is about the same as the D44.  Although I think I'd rather have a FF D44 rear I think.  Too bad they are scarce now.  They used to be all the rage before everyone started going 60 and 14.

What does the FF stand for?
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline neale_rs

  • Member
  • Posts: 3583
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #64 on: February 14, 2011, 11:43:48 AM »
Full Floating ... just came to me!  Thanks
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

RatherBeJeeping

  • Guest
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #65 on: February 14, 2011, 02:41:25 PM »
The YJ I bought my son was running 32x10.50 swampers with a D60 rear when I met the owner (McRae). He hit everything on the trail with that set up.

Now as for the pizza cutters, do they still make the 33x9.50 MT?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #66 on: February 14, 2011, 05:28:57 PM »
Do they even make 32x10.5's? I know they have 33x9.0r15's in the SS TSL and the 34x10.5r15's in the LTB's.  I only saw his jeep with the 35's.

BFG makes 33's in 9.5 and 10.5's still. They also make a metric 255/85r16 which is a smidge over 33 and 10.0" wide
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #67 on: February 16, 2011, 10:14:41 PM »


Guessing 31's. This shot made me  :roflol:
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #68 on: February 16, 2011, 10:17:14 PM »
yeah, that pic is for some reason funny, then I saw your comment

I also loving that anti-aircraft spotlight :lol:
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #69 on: February 16, 2011, 10:23:28 PM »
Quote from: sharpxmen on February 16, 2011, 10:17:14 PM
yeah, that pic is for some reason funny, then I saw your comment

I also loving that anti-aircraft spotlight :lol:

Not to mention the look on the drivers face, the dirt flying, missing snorkle, NERF bars  :lol:
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #70 on: February 17, 2011, 08:48:08 AM »
Quote from: FourbangerYJ on February 16, 2011, 10:23:28 PM
[...] missing snorkle, [...]
don't think is missing, he probably has an adjustable airbox  :wall:
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #71 on: February 17, 2011, 10:38:36 AM »
Quote from: sharpxmen on February 17, 2011, 08:48:08 AM
don't think is missing, he probably has an adjustable airbox  :wall:

Looks like it's working, look at the wheels spinning and dirt flying! It's even catching air!  :lol:
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #72 on: February 21, 2011, 10:14:53 PM »


They look like 31's.  That's a lot of wheel well opening for 31's though.  Those are stock 9-Slot wheels as well.  15x6".  Also looks like the sway bar is still attached, too.  The lights seem to be the cheap utility lights from walmart.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #73 on: March 12, 2011, 11:18:25 AM »
Another TJ on 33x10.5R15.  Still not sure if I like the 5-spoke or the older 6-spokes though.

Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline stan98tj

  • Empty Wallet Wheeling Since 2007®
  • Member
  • *
  • Posts: 1816
  • Wheeling New England
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #74 on: March 12, 2011, 02:16:17 PM »
Quote from: sharpxmen on February 17, 2011, 08:48:08 AM
don't think is missing, he probably has an adjustable airbox  :wall:
HA! just caught that. Thought you had gone mad for a second and i was going to call you out on it.
Logged
98 TJ 35"Maxxis Trep.Old Man Emu 2.5""+1"BL,IronMan Fab control arms,4.56gears,Ford 8.8+ARB,Currie/IronMan steering, WARN VR10,HP D30 sleeved+ RCV,Body Armor Rock Rails WISHLIST:TDi.Girlfriend hates it :) If you can read this don't flip me over i dont have any $$ left to fix it
Pages: 1 ... 3 4 [5] 6 7 ... 9   Go Up
« previous next »