Author Topic: Resistance for '93 2.5 fuel gauge  (Read 743 times)

0 Members and 2 Guests are viewing this topic.

YJWralph

  • Guest
Resistance for '93 2.5 fuel gauge
« on: May 01, 2011, 01:47:25 PM »
Hey all.  First posted question for this newbie!  :beers: I am eventually changing all of my gauges with a custom center gauge pod, and to get the right fuel gauge, I need to know the resistance that it operates on...   For a '93 w/ a 2.5.  Thanks, guys!

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Resistance for '93 2.5 fuel gauge
« Reply #1 on: May 01, 2011, 03:29:34 PM »
Hey all.  First posted question for this newbie!  :beers: I am eventually changing all of my gauges with a custom center gauge pod, and to get the right fuel gauge, I need to know the resistance that it operates on...   For a '93 w/ a 2.5.  Thanks, guys!

i think it was 90 ohm but not sure. i'll check and see if I have it somewhere. I would get the programmable one if you go with autometer, i got the regular one and is fairly inaccurate, same as the stock one however.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Resistance for '93 2.5 fuel gauge
« Reply #2 on: May 01, 2011, 06:34:49 PM »
0 ohms empty and 90 ohms full, usually.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

YJWralph

  • Guest
Re: Resistance for '93 2.5 fuel gauge
« Reply #3 on: May 02, 2011, 07:52:44 PM »
Thanks, guys!  Now I know...   :beers: