Author Topic: Hint  (Read 1566 times)

0 Members and 4 Guests are viewing this topic.

Offline grumpygy

  • Member
  • Posts: 882
Hint
« on: May 22, 2011, 01:33:43 PM »
  When changing the oil, put the plug back in before adding the new oil :'(
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Hint
« Reply #1 on: May 22, 2011, 02:14:57 PM »

  When changing the oil, put the plug back in before adding the new oil :'(


:roflol:

never did that but i did take the t-case off the transmission and did not drain the transmission fluid out (i did however drain the t-case which wasn't necessary) - i can't tell you how funny it looks trying to slide the t-case back in with all that oil coming out (it wasn't funny for me but sure for someone watching)
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline grumpygy

  • Member
  • Posts: 882
Re: Hint
« Reply #2 on: May 22, 2011, 02:25:59 PM »
This was to be the 1st time I used sythentic.
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Re: Hint
« Reply #3 on: May 22, 2011, 04:24:53 PM »
So how much did you lose?
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline easyup

  • Member
  • Posts: 17
Re: Hint
« Reply #4 on: May 22, 2011, 05:08:43 PM »
I once drained the transfer case on a Chevy and was interrupted by an unexpected old friend showing up.  Ended up taking him into the house and talking (beer involved).  I  did not mention to my wife the truck fluid draining.  She went out for some snacks and more beer and yes, she took the truck, not noticing the pan underneath.  Fortunately it was not the engine oil and all was well with that truck for years afterward.  She still drives a truck.

Offline grumpygy

  • Member
  • Posts: 882
Re: Hint
« Reply #5 on: May 22, 2011, 06:27:27 PM »
So how much did you lose?

4 qts  most went right in the drain pan that was still under it.  Mixing with the Gear oil I had just drained.
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Re: Hint
« Reply #6 on: May 22, 2011, 06:29:15 PM »
4 qts  most went right in the drain pan that was still under it.  Mixing with the Gear oil I had just drained.
Ah, that sucks.

I use a Sure-drain so as long as the tube is off, the pan is good.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Hint
« Reply #7 on: May 22, 2011, 08:13:34 PM »
4 qts  most went right in the drain pan that was still under it.  Mixing with the Gear oil I had just drained.
at least you had the pan under it...
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Torch_Ind

  • Guest
Re: Hint
« Reply #8 on: May 22, 2011, 08:40:51 PM »
  When changing the oil, put the plug back in before adding the new oil :'(

 :roflol:

don't feel bad I have done that before it sucks and I wasn't so lucky with the pan being under it lol

JohnnyO

  • Guest
Re: Hint
« Reply #9 on: May 23, 2011, 07:26:58 AM »
:roflol:

don't feel bad I have done that before it sucks and I wasn't so lucky with the pan being under it lol
I've done that when I was in a hurry.
It happens rarely but also always check your old oil filter to make sure the gasket came off with it and isn't still stuck on the block.  If there are two gaskets there it gets real messy real quick when you start it up.  I know this.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Re: Hint
« Reply #10 on: May 23, 2011, 09:15:44 AM »
At least no one had dropped the oil filter into the pan...  Or the drain plug...   :wall:
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Torch_Ind

  • Guest
Re: Hint
« Reply #11 on: May 23, 2011, 03:41:19 PM »
I've done that when I was in a hurry.
It happens rarely but also always check your old oil filter to make sure the gasket came off with it and isn't still stuck on the block.  If there are two gaskets there it gets real messy real quick when you start it up.  I know this.

I double check that oil filter ring all the time now to make sure it's not stuck there I have seen them go a few weeks without leaking then shift and blow out not fun!!