4bangerjp.com
General Forums => The Mess Hall => Topic started by: Dynamic4x4 on February 13, 2012, 02:10:39 PM
-
has anyone ever had a problem with there highbeams randomly cutting off? Everytime it does it i can flip the switch back to lowbeams and they work fine wait a few min and the highbeams will work again i cant ever figure it out becouse it only does it at random times. I went out and started it and left the highbeams on for about a hour and they worked fine the whole time tonight so im lost hope somebody has had this happen before or atleast knows what causes it. Thanks
-
has anyone ever had a problem with there highbeams randomly cutting off? Everytime it does it i can flip the switch back to lowbeams and they work fine wait a few min and the highbeams will work again i cant ever figure it out becouse it only does it at random times. I went out and started it and left the highbeams on for about a hour and they worked fine the whole time tonight so im lost hope somebody has had this happen before or atleast knows what causes it. Thanks
Probably a loose connection. I'd check the plug at the hi-beam switch on the steering column first.
-
has anyone ever had a problem with there highbeams randomly cutting off? Everytime it does it i can flip the switch back to lowbeams and they work fine wait a few min and the highbeams will work again i cant ever figure it out becouse it only does it at random times. I went out and started it and left the highbeams on for about a hour and they worked fine the whole time tonight so im lost hope somebody has had this happen before or atleast knows what causes it. Thanks
does it have DRL (daytime running lights module)? if yes that would be the next thing to look at after what Jeffy suggested.
-
My 95 did this endlessly while on hi-beams. I solved the issue by only using my 7" Kragen HIDs. That was my lazy fix for a dumb problem. :thumb:
Later on, I did notice water collecting in the bulb, and I think the issue may have been the water shorting the light circuit. It wasn't a little bit of water eaiter, looked like a gold fish could take a dive in there.
-
I pulled the plugs off and checked them none looked like they where realy to dirty or loose but i cleaned them off anyways and so far they havent cut off anymore but i havent realy been able to run them to much sence then, and no it doesnt have drl, and i can use my foglights but it just gets annoying haveing to reach down to turn them off all the time but hopefully it was just one of the connections i cleaned off today thanks for all the help
-
HEY, ValveStemSafetInspector, THANKS FOR FRYING MY EYEBALLS. Hunter
-
HEY, ValveStemSafetInspector, THANKS FOR FRYING MY EYEBALLS. Hunter
:eek:
I can't use them all the time. I'm not like the a$$e$ with the HID conversions running them as lo-beams. I feel like getting a laser pointer and blind those pricks back. http://www.youtube.com/watch?v=6DFWOFFY71o
-
Most time when I flash My lights to get folks to dim theirs, they do Nothing. But I did convert my Fog Light to HID. Turn them on and folks dim their lights quick :dance:
-
has anyone ever had a problem with there highbeams randomly cutting off?
Have had a problem with my highbeams -- they're so powerful, they set tumbleweeds on fire a quarter mile down the highway. In fact, Edwards Air Force base wants to try knocking-down Chinese Satellites with them. :eek:
It's getting kind of ridiculous.
Fortunately, they're not randomly cutting off as yet, though. Hope you get your highbeams working good again :thumb:
-
Awesome, I want some of those!
-
Sounds like a bad headlights switch, if its a YJ.