« previous next »
Pages: [1]   Go Down

Author Topic: Highbeams cut off  (Read 1729 times)

0 Members and 1 Guest are viewing this topic.

Dynamic4x4

  • Guest
Highbeams cut off
« on: February 13, 2012, 02:10:39 PM »
has anyone ever had a problem with there highbeams randomly cutting off?  Everytime it does it i can flip the switch back to lowbeams and they work fine wait a few min and the highbeams will work again i cant ever figure it out becouse it only does it at random times.  I went out and started it and left the highbeams on for about a hour and they worked fine the whole time tonight so im lost hope somebody has had this happen before or atleast knows what causes it.  Thanks
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Highbeams cut off
« Reply #1 on: February 13, 2012, 02:16:10 PM »
Quote from: Dynamic4x4 on February 13, 2012, 02:10:39 PM
has anyone ever had a problem with there highbeams randomly cutting off?  Everytime it does it i can flip the switch back to lowbeams and they work fine wait a few min and the highbeams will work again i cant ever figure it out becouse it only does it at random times.  I went out and started it and left the highbeams on for about a hour and they worked fine the whole time tonight so im lost hope somebody has had this happen before or atleast knows what causes it.  Thanks
Probably a loose connection.  I'd check the plug at the hi-beam switch on the steering column first.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Highbeams cut off
« Reply #2 on: February 13, 2012, 05:21:30 PM »
Quote from: Dynamic4x4 on February 13, 2012, 02:10:39 PM
has anyone ever had a problem with there highbeams randomly cutting off?  Everytime it does it i can flip the switch back to lowbeams and they work fine wait a few min and the highbeams will work again i cant ever figure it out becouse it only does it at random times.  I went out and started it and left the highbeams on for about a hour and they worked fine the whole time tonight so im lost hope somebody has had this happen before or atleast knows what causes it.  Thanks


does it have DRL (daytime running lights module)? if yes that would be the next thing to look at after what Jeffy suggested.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline aka-justin

  • Member
  • Posts: 883
Re: Highbeams cut off
« Reply #3 on: February 13, 2012, 09:42:43 PM »
My 95 did this endlessly while on hi-beams. I solved the issue by only using my 7" Kragen HIDs.  That was my lazy fix for a dumb problem. :thumb:

Later on, I did notice water collecting in the bulb, and I think the issue may have been the water shorting the light circuit. It wasn't a little bit of water eaiter, looked like a gold fish could take a dive in there.
« Last Edit: February 13, 2012, 09:43:31 PM by 1995yj »
Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Dynamic4x4

  • Guest
Re: Highbeams cut off
« Reply #4 on: February 15, 2012, 11:17:20 AM »
I pulled the plugs off and checked them none looked like they where realy to dirty or loose but i cleaned them off anyways and so far they havent cut off anymore but i havent realy been able to run them to much sence then,  and no it doesnt have drl, and i can use my foglights but it just gets annoying haveing to reach down to turn them off all the time but hopefully it was just one of the connections i cleaned off today thanks for all the help
Logged

Offline Hunter02

  • Member
  • Posts: 64
Re: Highbeams cut off
« Reply #5 on: February 19, 2012, 12:04:52 AM »
HEY, ValveStemSafetInspector, THANKS FOR FRYING MY EYEBALLS.     Hunter
Logged

Offline aka-justin

  • Member
  • Posts: 883
Re: Highbeams cut off
« Reply #6 on: February 19, 2012, 12:08:17 AM »
Quote from: Hunter02 on February 19, 2012, 12:04:52 AM
HEY, ValveStemSafetInspector, THANKS FOR FRYING MY EYEBALLS.     Hunter

 :eek:

I can't use them all the time. I'm not like the a$$e$ with the HID conversions running them as lo-beams. I feel like getting a laser pointer and blind those pricks back. http://www.youtube.com/watch?v=6DFWOFFY71o
Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline grumpygy

  • Member
  • Posts: 882
Re: Highbeams cut off
« Reply #7 on: February 19, 2012, 02:33:40 PM »
Most time when I flash My lights to get folks to dim theirs, they do Nothing.  But I did convert my Fog Light to HID.  Turn them on and folks dim their lights quick :dance:
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline chrisfranklin

  • 4BangerJP.comŪ Donator
  • Member
  • *
  • Posts: 1276
Re: Highbeams cut off
« Reply #8 on: February 28, 2012, 10:42:30 AM »
Quote from: Dynamic4x4 on February 13, 2012, 02:10:39 PM
has anyone ever had a problem with there highbeams randomly cutting off? 

Have had a problem with my highbeams -- they're so powerful, they set tumbleweeds on fire a quarter mile down the highway.  In fact, Edwards Air Force base wants to try knocking-down Chinese Satellites with them.  :eek:

It's getting kind of ridiculous. 

Fortunately, they're not randomly cutting off as yet, though.  Hope you get your highbeams working good again  :thumb:
Logged
'94 YJ S 5spd, Borla Exhaust, CarSound Cat., PS Ceramic-coated Headers, Airraid intake, 62mm TB, Intake Manifold bored/ceramic-coated, 19lb injectors, Sharp's Adj. FPR, MeanGreen Starter, D30 Aussie locker, 31" Destination MTs, Warn XD9000, Cibie headlights, armor

Offline neale_rs

  • Member
  • Posts: 3583
Re: Highbeams cut off
« Reply #9 on: February 28, 2012, 10:48:36 AM »
Awesome, I want some of those!
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Highbeams cut off
« Reply #10 on: February 29, 2012, 07:18:36 PM »
Sounds like a bad headlights switch, if its a YJ.
Logged
Pages: [1]   Go Up
« previous next »