« previous next »
Pages: [1]   Go Down

Author Topic: ENGINE BLOW!  (Read 991 times)

0 Members and 1 Guest are viewing this topic.

jakbob

  • Guest
ENGINE BLOW!
« on: April 08, 2006, 06:21:09 PM »
yeah so i blew my 4banger and wanted to know...can i just leave the transmission in as i take the motor out? or do i really have to take the transmission out?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
ENGINE BLOW!
« Reply #1 on: April 08, 2006, 06:25:59 PM »
Take the front grill out and leave the transmission in.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chardrc

  • Member
  • Posts: 3535
ENGINE BLOW!
« Reply #2 on: April 23, 2006, 07:49:11 PM »
why take grill out?.. on my 1990 yj we just took ht efan shroud off didconected wires ect and unbolted engin and lifter it out... i dont see why you would need to take the grill off.
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
ENGINE BLOW!
« Reply #3 on: April 23, 2006, 08:03:38 PM »
Makes it easier to slip the engine in and out without having to lift it over the grill.  (might be working in a garage.) Although if he's taking the whole driveline out in one piece he'd need to.  It'll also gives you a bit more room to work with.  It doesn't take more then 5 minutes to remove once the radiator is drained.  Just a suggestion in any case.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

wrangler387

  • Guest
ENGINE BLOW!
« Reply #4 on: April 23, 2006, 09:38:56 PM »
^ yea, lifting a motor out over the grill inside a garage i think would be impossible (i'm talking your typically 8-9ft ceiling or whatever it is) I know at my parents house I was inches away from the roof pulling the motors out of accords/civics/integras that were only inces off the ground.

To the maker of this thread... what is the damage report on the motor? is the head in good shape? I may buy it from you  :wink:
Logged
Pages: [1]   Go Up
« previous next »