« previous next »
Pages: [1]   Go Down

Author Topic: installed half my lift  (Read 1646 times)

0 Members and 1 Guest are viewing this topic.

lanulos89

  • Guest
installed half my lift
« on: June 03, 2006, 10:52:31 PM »
well today i installed half my lift.  The back half and the t case drop. Its a 3.5",  all went smooth, except when i now goto shift its hard to shift it. Its a automatic tranny so my guess is i gotta ajust some tranny linkage or something any ideas, i will post some pics morow when it is complete.
Logged

yjdave

  • Guest
installed half my lift
« Reply #1 on: June 04, 2006, 10:25:41 AM »
I have a 3.5 as well, but with a manual, and yes i had to trim a bit the plastic around the gear stick (excuse my english). "nd and 4thg would eventually skip out on bumpy roads
Logged

lanulos89

  • Guest
installed half my lift
« Reply #2 on: June 04, 2006, 06:09:53 PM »
well its done here some pics
Before



After








Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
installed half my lift
« Reply #3 on: June 04, 2006, 07:18:00 PM »
Looks like you need to trim the U-bolts down a bit.  Throw on some 33x9.5R15's and you'd be set.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

j-freak153

  • Guest
installed half my lift
« Reply #4 on: June 04, 2006, 07:58:56 PM »
33x10.5r15....thats what i have and they are awesome...BFG AT come's in 9.5", MT are 10.5"....they make 10.5" boggers in 35".....those would be BAAAAD 8)
Logged

SMC4WD

  • Guest
installed half my lift
« Reply #5 on: June 04, 2006, 08:22:09 PM »
It does look really good.  The Jeep is coming to look very 4wd worthy.

Jeffy mentioned Ubolt Skid plates.

HEAVY DUTY SPRING PLATES FOR 2 1/2" WIDE SPRINGS W/SHOCK OR SWAY BAR MOUNT  
Mfg:  Currie Jeep  
Our Price: $104.95
Description: These Spring Plates are built to withstand the most rugged off road abuse. They have a built-on skid plate to protect U-Bolts. The top plate is 5/16" steel and the bottom (skid plate) is stamped out of 1/4" steel. These Heavy Duty Universal Spring Plates are designed to be used with 2 1/2" wide springs and come with optional shock or sway-bar mounts - please specify when ordering. Price listed is for a pair of plates.
 
Unit of Measure: Pair

These are a great direction to go too!!
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
installed half my lift
« Reply #6 on: June 04, 2006, 10:59:30 PM »
Quote from: "j-freak153"
33x10.5r15....thats what i have and they are awesome...BFG AT come's in 9.5", MT are 10.5"....they make 10.5" boggers in 35".....those would be BAAAAD 8)


Did you ever take picures of your Jeep with the 10.5's?

Boggers really suck if you have to drive on road a lot.  They have 34x9.5R15 TSL's and a cheaper 34x10.5R15 LTB also.  For a daily, you'd be better off with a radial tire.  I know Dunlop or someone also makde a 33x10.5R15, too.

Quote from: "SMC4WD"
It does look really good.  The Jeep is coming to look very 4wd worthy.

Jeffy mentioned Ubolt Skid plates.


These are a great direction to go too!!


I mentioned trimming his bolts.  Those Currie plates are HUGE.  I should know, I run them out back.  They're like pontoons. :lol:

If I was going to replace my spring plates I'd go with something like the JKS plates.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."
Pages: [1]   Go Up
« previous next »