« previous next »
Pages: [1]   Go Down

Author Topic: Centerforce clutch really worth it?  (Read 1269 times)

0 Members and 1 Guest are viewing this topic.

wrangler387

  • Guest
Centerforce clutch really worth it?
« on: August 20, 2006, 10:04:11 AM »
I'm in the process of revamping my drivetrain. I have a rebuilt ax5, and a NP231 with a SYE and new chain. I'm going to replace my clutch at the same time, but i'm not sure if it's worth spending twice as much for a centerforce over the exedy oem replacement. I know some cars have really weak clutches stock, so aftermarket is almost required, but how about these 4 cylinder jeeps? They are a light duty vehicle so i'm assuming they must have a beefier clutch than your typical ricer 4 cylinder... For people who have replaced there clutch, which way did you go and why? I'd obviously like to spend as little as possible since I am a full time college student and in a serious relationship, but if the centerforce is a must then that's what i'll do.


Randy
Logged

Guardian7

  • Guest
Centerforce clutch really worth it?
« Reply #1 on: August 20, 2006, 07:23:26 PM »
I used a Centerforce and did not notice any difference in performance but I went back to a Haynes clutch when the Centerforce exploded on a hill climb. Just get a good brand name and make sure it's not a re-manufactured clutch which dont last as long. Clutches are alot like brake pads, they do wear out.
Good reading: http://www.dialaclutch.com/performanceclutch.htm
Logged

Jesse-James

  • Guest
Centerforce clutch really worth it?
« Reply #2 on: August 20, 2006, 09:40:48 PM »
Last clutch I replaced was in my Comanche. I got a standard kit from

http://eclutchmaster.com/oemsearch.asp?searchstring=JEEP

Had no complaints. Pretty good price too.
Logged

might4banger

  • Guest
Centerforce clutch really worth it?
« Reply #3 on: August 21, 2006, 07:58:47 AM »
I replaced mine with the std. Sachs - was like $125 for the whole kit... I has held up to some amazing abuse - Pulling a tadem axle trailer LOADED, extracting stuck trucks when we built our house and so on...

I don't think you need anything HD behind these 4bangers...
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Centerforce clutch really worth it?
« Reply #4 on: August 21, 2006, 12:19:09 PM »
Well, the big thing about Centerforce clutches are the weights that help apply pressure to the clutch.  Well because of the bellhousing clearance, they don't use the weights on the 2.5L application.  Although they do have the Dual-Friction but unless you've really beafed up your engine most guy's I know just use a regular name brand clutch.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

wrangler387

  • Guest
Centerforce clutch really worth it?
« Reply #5 on: August 21, 2006, 02:55:29 PM »
Thanks,
I'll be getting a OEM relacement name brand clutch then.
Logged

Offline 95jeeper

  • Member
  • Posts: 43
Centerforce clutch really worth it?
« Reply #6 on: August 27, 2006, 12:26:52 PM »
If your still looking into getting a centerforce i have one for sale
I tryed to install it but it didn't work.
The clutch wouldn't disengage.
Now either the pressure plate was bad or it was my trans.
My tranny has been going out for a while and now i am going to do a nv3550 conversion so i no longer need the clutch.
I don't know what the problem is with the clutch but if you are interested i will sell it cheap.
Logged
95 rio grande 4" Skyjacker lift 1" shackel 33" tires, efan, 4.0TB, kn air filter, exhaust, and sound system. NV3550 conversion

wrangler387

  • Guest
Centerforce clutch really worth it?
« Reply #7 on: August 28, 2006, 08:24:43 PM »
Hey,
Thanks for the offer, but i already purchased a OEM replacement.
Logged
Pages: [1]   Go Up
« previous next »