« previous next »
Pages: [1]   Go Down

Author Topic: Toyota axles in a YJ??  (Read 1528 times)

0 Members and 1 Guest are viewing this topic.

dan684

  • Guest
Toyota axles in a YJ??
« on: November 30, 2006, 08:15:18 PM »
Looking for and upgrade for my 35 and im yhinking about a toyota rear end.  has anyone done this or know anything about toyota axles??  would this be a reasonable swap?? it out of a 95 toyota 2wd i think.  they are about 58"-58 1/2" wide so they are pretty close to the width of the 35.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Toyota axles in a YJ??
« Reply #1 on: November 30, 2006, 08:21:59 PM »
Quote from: "dan684"
Looking for and upgrade for my 35 and im yhinking about a toyota rear end.  has anyone done this or know anything about toyota axles??  would this be a reasonable swap?? it out of a 95 toyota 2wd i think.  they are about 58"-58 1/2" wide so they are pretty close to the width of the 35.


Here's a starter:

http://www.4bangerjp.com/forums/viewtopic.php?t=254
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

dan684

  • Guest
toy axle
« Reply #2 on: December 04, 2006, 09:01:48 PM »
well i found a toyota 8" IFS Rear that has 4.10 gears and is 58" wide for $100.  

Does this sound like a goos deal?  How much do these axles usually sell for?

Also are the spring peches anywhere close to matching or will I definitely have to relocate them for proper pinion angle?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: toy axle
« Reply #3 on: December 04, 2006, 09:56:12 PM »
Quote from: "dan684"
well i found a toyota 8" IFS Rear that has 4.10 gears and is 58" wide for $100.  

Does this sound like a goos deal?  How much do these axles usually sell for?

Also are the spring peches anywhere close to matching or will I definitely have to relocate them for proper pinion angle?


What is the axle from, Tacoma, 2wd, etc...  I'd say the price is right depending on what it came out of.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chardrc

  • Member
  • Posts: 3535
Toyota axles in a YJ??
« Reply #4 on: December 05, 2006, 07:25:18 PM »
only thing is your going foreign.
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Toyota axles in a YJ??
« Reply #5 on: December 05, 2006, 07:56:45 PM »
Quote from: "chardrc"
only thing is your going foreign.


 :roll:   Ever look where you Jeep was made?  It isn't where you think...
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Jesse-James

  • Guest
Toyota axles in a YJ??
« Reply #6 on: December 06, 2006, 12:47:01 AM »
I had an 86 toy pickup that I beat the crap out of and the frame broke before anything else. They're not built as cheply as you think. (other than the thin rust prone body).

Logged

dan684

  • Guest
Toyota axles in a YJ??
« Reply #7 on: December 08, 2006, 03:54:33 PM »
im pretty sure its from a 4wd but not 100% sure. im going to ask him today also if it came from a 4-cyl or a v6 cuz i heard the v6 models had a thicker ring gear
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Toyota axles in a YJ??
« Reply #8 on: December 08, 2006, 04:51:46 PM »
Depending on which Toy 8" you get, the R&P size will vary.  I believe there are three types.  The Basic Toy 8's, the V6/Turbo and the Tacoma.  Some parts aren't interchangeable.  I believe shafts are though.  So you cna swap from 6 on 5.5" to 5 on 4.5" if you wanted to.  Lockers will be dependent on the axle also.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

dan684

  • Guest
Toyota axles in a YJ??
« Reply #9 on: December 08, 2006, 07:52:09 PM »
i was wondering if i could swap axles from a 2wd version that was 5 on 4.5 to match my d30 until i can get a 44 for the front
Logged
Pages: [1]   Go Up
« previous next »