Author Topic: Cherokee D44 axle upgrade  (Read 880 times)

0 Members and 1 Guest are viewing this topic.

Offline neale_rs

  • Member
  • Posts: 3583
Cherokee D44 axle upgrade
« on: January 10, 2008, 08:32:26 AM »
 
Does anyone know if this kit would fit a Cherokee D44 rear axle?

Superior Axle & Gear Super 44 Axle Kit with Detroit Locker for 97-04 Jeep Wrangler TJ

Thanks


 
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Cherokee D44 axle upgrade
« Reply #1 on: January 10, 2008, 09:27:34 AM »
Looks like it will.  But for that kind of money you could build and swap in a disc braked 35 spline Dana 60.
http://www.4wheelerssupply.com/catalog/product_info.php/products_id/71553
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline neale_rs

  • Member
  • Posts: 3583
Re: Cherokee D44 axle upgrade
« Reply #2 on: January 10, 2008, 11:10:39 AM »
Thanks for locating that link.  I'm not actually thinking of doing it for now but just looking into it to get a general idea of parts availability for my D44.  Also, as an option for changing the bolt pattern in case of a front axle upgrade.
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Cherokee D44 axle upgrade
« Reply #3 on: January 10, 2008, 02:12:52 PM »
Yes and no.  The shafts are the same as well asn much of everything else.  You'll need to get new bearing retainer plates though.  The TJ D44-3 and the XJ D44 are different.  The XJ uses standard D44 flange bolt pattern while the TJ uses the D35's smaller pattern.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: Cherokee D44 axle upgrade
« Reply #4 on: January 10, 2008, 02:31:07 PM »
Can the ones already on the D44 axle be re-used or are they special for the kit axle shafts?
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Cherokee D44 axle upgrade
« Reply #5 on: January 10, 2008, 05:24:51 PM »
Can the ones already on the D44 axle be re-used or are they special for the kit axle shafts?

If you want to go through the hassle of cutting off the old bearings for a $5 part.  If you buy the kit through Drivetrain Direct, you can probably have them change out the retainers.  They are either closely tied to Superior/Foote Axle or are owned by them.

If you really wanted more strength, it would probably be cheaper to buy a 14 Bolt rear then a D60.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Cherokee D44 axle upgrade
« Reply #6 on: January 10, 2008, 06:41:22 PM »
Can the ones already on the D44 axle be re-used or are they special for the kit axle shafts?

Easiest to just get slotted retainers rather than going through the hassle of pressing them on behind the bearings.  Most of the drag stuff uses them, they are plenty strong.  Retainers are cheap anyway.
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline neale_rs

  • Member
  • Posts: 3583
Re: Cherokee D44 axle upgrade
« Reply #7 on: January 11, 2008, 07:43:24 AM »
Thanks.  Looks like I need to get a service manual for the D44 to get a better idea of these parts.

'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline neale_rs

  • Member
  • Posts: 3583
Re: Cherokee D44 axle upgrade
« Reply #8 on: January 11, 2008, 12:48:38 PM »
Found this write up.  Looks like Drivetrain Direct is the answer.

http://www.4x4wire.com/jeep/tech/axle/superior02/
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline neale_rs

  • Member
  • Posts: 3583
Re: Cherokee D44 axle upgrade
« Reply #9 on: January 11, 2008, 12:53:12 PM »
Wow, just noticed who wrote it!
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch